UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Ohlins S46HR1C1LS rear shock
https://ukbeg.com/forum/viewtopic.php?f=10&t=23466		 Page 1 of 2
Author:  BUE11 [ 08 Oct 2018 20:20 ]
Post subject:  Ohlins S46HR1C1LS rear shock
Ohlins S46HR1C1LS
for BUELL XB12R/XB9R Firebolt 2002-2009

£300 + shipping

Attachments:
BUELL.jpg
BUELL.jpg [ 1.22 MiB | Viewed 2179 times ]
Author:  Maz [ 08 Oct 2018 21:03 ]
Post subject:  Re: Ohlins S46HR1C1LS rear shock
Surely that's for a Uly ?
Author:  kevmean [ 08 Oct 2018 21:06 ]
Post subject:  Re: Ohlins S46HR1C1LS rear shock
If this will fit a Uly i'll have it , I'm not sure if the Uly is a different length though , maybe somebody can confirm?
Author:  kevmean [ 08 Oct 2018 21:10 ]
Post subject:  Re: Ohlins S46HR1C1LS rear shock
Maz wrote:
Surely that's for a Uly ?

I see on Twin website it lists a remote preload adjuster on the R and the S shocks from ohlins but they don't list a Uly version.
Do you know if the length is different on a Uly Maz?
Author:  BUE11 [ 08 Oct 2018 22:02 ]
Post subject:  Re: Ohlins S46HR1C1LS rear shock
360MM - 370MM from hole centres
Author:  kevmean [ 08 Oct 2018 22:17 ]
Post subject:  Re: Ohlins S46HR1C1LS rear shock
BUE11 wrote:
360MM - 370MM from hole centres

I need to do some research ;)
Author:  BUE11 [ 10 Oct 2018 17:53 ]
Post subject:  Re: Ohlins S46HR1C1LS rear shock
the stock uly shock is 370mm from eye to eye centres
Author:  kevmean [ 10 Oct 2018 18:31 ]
Post subject:  Re: Ohlins S46HR1C1LS rear shock
BUE11 wrote:
the stock uly shock is 370mm from eye to eye centres

Hagon shocks gave me some specs
12s / r standard eye to eye length is 359mm with an 80mm stroke
Uly standard eye to eye is 380mm but also with a 100mm stroke , the smaller storke length would be the issue assuming the Ohlins is 80mm the same as standard.
Author:  BUE11 [ 14 Oct 2018 18:45 ]
Post subject:  Re: Ohlins S46HR1C1LS rear shock
ohlins says 80mm stroke which is ok apparently
Author:  BUE11 [ 14 Oct 2018 19:02 ]
Post subject:  Re: Ohlins S46HR1C1LS rear shock
XB12X - - 377mm
XB12STT - 361mm
XB12SS (06) - 346mm
Author:  barney [ 16 Oct 2018 08:51 ]
Post subject:  Re: Ohlins S46HR1C1LS rear shock
kevmean wrote:
BUE11 wrote:
the stock uly shock is 370mm from eye to eye centres

Hagon shocks gave me some specs
12s / r standard eye to eye length is 359mm with an 80mm stroke
Uly standard eye to eye is 380mm but also with a 100mm stroke , the smaller storke length would be the issue assuming the Ohlins is 80mm the same as standard.


if the Uly has got a 100mm stroke it would also suggest it has a softer spring to allow use of the 100mm stroke :idea:
Author:  kevmean [ 16 Oct 2018 22:06 ]
Post subject:  Re: Ohlins S46HR1C1LS rear shock
barney wrote:
kevmean wrote:
BUE11 wrote:
the stock uly shock is 370mm from eye to eye centres

Hagon shocks gave me some specs
12s / r standard eye to eye length is 359mm with an 80mm stroke
Uly standard eye to eye is 380mm but also with a 100mm stroke , the smaller storke length would be the issue assuming the Ohlins is 80mm the same as standard.


if the Uly has got a 100mm stroke it would also suggest it has a softer spring to allow use of the 100mm stroke :idea:

Same spring rate according to Hagon Barney. I don't know if it is the same length spring and just compressing it an extra 20mm or same rate but longer spring.
Author:  BUE11 [ 17 Oct 2018 19:45 ]
Post subject:  Re: Ohlins S46HR1C1LS rear shock
hi,does anyone want this shock need to shift it i will reduce price if needs be,thanks
Author:  Micklen [ 28 Oct 2018 09:18 ]
Post subject:  Re: Ohlins S46HR1C1LS rear shock
Would it fit a 1125CR?

//Carl
Author:  DaveH [ 28 Oct 2018 12:20 ]
Post subject:  Re: Ohlins S46HR1C1LS rear shock
No. Totally different shock.
Page 1 of 2 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/