It is currently 28 Mar 2024 21:59

All times are UTC




Post new topic  Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Risers
PostPosted: 15 Oct 2019 21:35 
Offline

Joined: 22 Jun 2014 02:03
Posts: 6
Current ride: cyclone m2
Location: essex
Good evening all,
As the effects of old age are catching up with me, I find I need to have a more upright riding position on my cyclone m2.I figure a set of risers could be the easiest way to go, so I need some advice on how high I can go without having to start changing cables, and altering wiring etc, and where to get some from,
Thanks in advance,
Rod.


Top
 Post subject: Re: Risers
PostPosted: 15 Oct 2019 22:04 
Offline
User avatar

Joined: 22 May 2009 18:43
Posts: 3191
Current ride: S1`s
Location: Llanelli South Wales
I bought higher bars . have risers on other bike


Top
 Post subject: Re: Risers
PostPosted: 15 Oct 2019 22:09 
Offline
User avatar

Joined: 05 May 2009 20:00
Posts: 10850
Current ride: X1 2001
Location: southampton
try a pm to cyclonedude who has done it to his stunning M2

:yup:

_________________
Feros Ferio


Top
 Post subject: Re: Risers
PostPosted: 16 Oct 2019 00:19 
Offline
User avatar

Joined: 06 May 2009 19:42
Posts: 3133
Current ride: M2 Razorback
Location: Mouth of the Port in the Shire of Hamp
Nutah wrote:
try a pm to cyclonedude who has done it to his stunning M2

:yup:

This ^^^
I have a suspicion they're export Bonnie bars.

_________________
'98 M2 Razorback, it's a keeper.


Top
 Post subject: Re: Risers
PostPosted: 16 Oct 2019 10:22 
Offline
User avatar

Joined: 06 May 2009 13:55
Posts: 4500
Current ride: K100 CBR1000F z550Gt
Location: Joondalup
How about S3 bars, I'm guessing they're higher?

_________________
Wear the fox hat


Top
 Post subject: Re: Risers
PostPosted: 16 Oct 2019 12:54 
Offline
User avatar

Joined: 22 May 2009 18:43
Posts: 3191
Current ride: S1`s
Location: Llanelli South Wales
https://www.customfighters.com/forums/v ... imgid=2171

I`m guessing , but you`ll need longer cables.....


Top
 Post subject: Re: Risers
PostPosted: 17 Oct 2019 23:03 
Offline

Joined: 22 Jun 2014 02:03
Posts: 6
Current ride: cyclone m2
Location: essex
I don’t need huge bars about 2 inches but I need to know if it can be done without cutting into the electrics, are the s3 bars any higher if so how much, who sells risers for the m2.
Many thanks, Rod.


Top
 Post subject: Re: Risers
PostPosted: 17 Oct 2019 23:44 
Offline
User avatar

Joined: 22 May 2009 18:43
Posts: 3191
Current ride: S1`s
Location: Llanelli South Wales
https://www.facebook.com/groups/1369085 ... SEARCH_BOX

I have raised by one inch no problem with cables - hoses.

Any different bars will have to be long enough throttle side to take brake , switches and throttle grip about 200mm

Possibly these https://www.ebay.co.uk/itm/Renthal-Road ... SwVlVaHmiY


Top
 Post subject: Re: Risers
PostPosted: 17 Oct 2019 23:48 
Offline
User avatar

Joined: 22 May 2009 18:43
Posts: 3191
Current ride: S1`s
Location: Llanelli South Wales
Putting bar risers into the search function, goes back in time. viewtopic.php?f=7&t=129&p=1316&hilit=bar+risers#p1316


Top
 Post subject: Re: Risers
PostPosted: 18 Oct 2019 07:59 
Offline
User avatar

Joined: 09 May 2009 22:05
Posts: 129
Current ride: V85Tt, SurRon,Tracer
Location: Portland
I put these on my S1 after much searching and measuring
https://www.classicbikeshop.co.uk/controls-bars-levers/handle-bars/bsa-b44-usa-handlebars.html
They were ideal for me. Stainless, cheap, higher, more pull back, slightly narrower so cables still fitted.


Top
 Post subject: Re: Risers
PostPosted: 21 Oct 2019 16:00 
Offline

Joined: 22 Jun 2014 02:03
Posts: 6
Current ride: cyclone m2
Location: essex
I think that maybe the s3 bars are the way to go, hopefully they will fit without altering to much, now where can I get some?
Regards Rod.


Top
 Post subject: Re: Risers
PostPosted: 21 Oct 2019 17:50 
Offline
User avatar

Joined: 06 May 2009 19:42
Posts: 3133
Current ride: M2 Razorback
Location: Mouth of the Port in the Shire of Hamp
rik wrote:
Nutah wrote:
try a pm to cyclonedude who has done it to his stunning M2

:yup:

This ^^^
I have a suspicion they're export Bonnie bars.

Confirmed. All cables standard.

_________________
'98 M2 Razorback, it's a keeper.


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 12 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited