I'd have a Thruxton, but it would need a lot more horsepower to keep me entertained.

My manifolds turned up and I couldn't help but give them the treatment.









The crankshaft is at Basset Down for balancing, so I'm machining the left hand case to accept my seal holder at present.

_________________
I started out with nothing and still got most of it left.

A few have asked for an update on the Alfa so I thought I better had.
Its back at home and in the garage now.


Mostly the engine, electrics, braking system and steering are in place now, just the cooling system and some finishing off in there to do now.


This bit is like my worst nightmare, I hate wiring but its made worse by the fact that mine is amongst the rarest models and I can't actually get a proper model specific wiring diagram

is that 2 servos ?

_________________
Obey the principles without being bound by them.
Bruce Lee

It is, dual circuit and not that unusual in the 70's I believe.

Andy

very nice

_________________
Obey the principles without being bound by them.
Bruce Lee

Spent a lot of after work hours on the crankcases over the last few weeks..............







I made an oil seal holder for the drive side case, to enable me to run a Bob Newby Racing belt driven clutch.

_________________
I started out with nothing and still got most of it left.

nice work Mick

_________________
Obey the principles without being bound by them.
Bruce Lee

BTW Mick, that cardboard fuel tank won't work

_________________
If your dreams don't scare you, they are not big enough.

Yes it will...it has duct tape on it !

Eric.

_________________
'09 XB12XT
'02 Beta Alp 200
'82 + '83 CX500 euroSports's
'83 CX650 Custom
Green "4 Legged" SUV

It was just a mock up. I have the real thing now.

_________________
I started out with nothing and still got most of it left.

New roof on the big garage, 168 solar panels.


Shouldn't have to pay for electric at work again

Andy

Been working on these for a while, seems to take me ages to learn new stuff these days, must be getting old.
Not Quite finished yet.






Its not for a Buell but I will be making something like it for Buells soon.

Andy

Very nice, Andy.

Did you get a grant for those solar panels?

_________________
I started out with nothing and still got most of it left.

I didn't need to mate, with the feed in tarriff and the saving in electric, which is well over half the useage, it will just pay for itself.

Give you an idea, 20 years of FIT which is guaranteed as long as the building is standing and the savings over the same period equals £290K, it was a bit of a no brainer.

Andy

nice result ....can i run an extension lead down to sarfampton

_________________
Obey the principles without being bound by them.
Bruce Lee