Last visit was: Fri Apr 10, 2020 3:22 am It is currently Fri Apr 10, 2020 3:22 am

All times are UTC+01:00




 [ 8 posts ] 
Author Message
 Post subject: Indicators
PostPosted: Fri Jan 17, 2020 9:15 am 
Offline

Joined: Sat Aug 03, 2019 11:38 am
Posts: 13
Current ride: XB12R,FXR,1125R
Location: Catterick Garrison
Hi,
Does anybody know if I can replace the LED indicators, on my 1125, with bulbs (21W). Can the Flasher Can take the extra current?
Cheers,
Murray. 😎


Top
   
 
 Post subject: Re: Indicators
PostPosted: Sun Jan 19, 2020 1:46 pm 
Offline
User avatar

Joined: Mon Mar 05, 2018 1:09 am
Posts: 393
Current ride: Xt500 , 1125 CR
Location: Tiddly village near the throbbing metropolis of Rugby
Murray wrote:
Hi,
Does anybody know if I can replace the LED indicators, on my 1125, with bulbs (21W). Can the Flasher Can take the extra current?
Cheers,
Murray. 😎

There might be some issue with the flash rate even if the current can be supplied.......sounds like you might be swapping out the Indicator stalks....can you not chose led items?

_________________
Caution: I run with scissors.


Top
   
 
 Post subject: Re: Indicators
PostPosted: Tue Jan 21, 2020 12:07 am 
Offline

Joined: Sat Aug 03, 2019 11:38 am
Posts: 13
Current ride: XB12R,FXR,1125R
Location: Catterick Garrison
Hi Ohsteveo,
Yeah I am replacing the front indicators. The new ones have bulbs in them but I think if I put LED bulbs in, they might be OK. I haven't received them yet but I will give it a try when they arrive.
Cheers for the reply,
Murray.


Top
   
 
 Post subject: Re: Indicators
PostPosted: Tue Jan 21, 2020 11:22 am 
Offline

Joined: Wed Aug 01, 2018 7:58 pm
Posts: 1335
Current ride: Buell 1125R
Hi Murray, I've currently got two bulbs on the rear & two leds on the front, I've also used 4 bulbs with no problems with flash rate. Standard flasher unit.
All the best.

_________________
Ride Safe & Stay between the hedgerows.


Top
   
 
 Post subject: Re: Indicators
PostPosted: Mon Jan 27, 2020 6:28 pm 
Offline

Joined: Tue Oct 31, 2017 2:37 pm
Posts: 81
Current ride: Ulysses
worse case change the flasher relay for an early one that did not have LED's have just done the opposite on my ully, taken the original bulb relay out and replaced with a later LED relay. Works a treat and just a couple of quid


Top
   
 
 Post subject: Re: Indicators
PostPosted: Thu Jan 30, 2020 12:21 am 
Offline
User avatar

Joined: Mon Mar 05, 2018 1:09 am
Posts: 393
Current ride: Xt500 , 1125 CR
Location: Tiddly village near the throbbing metropolis of Rugby
chopperneil wrote:
worse case change the flasher relay for an early one that did not have LED's have just done the opposite on my ully, taken the original bulb relay out and replaced with a later LED relay. Works a treat and just a couple of quid

I don't think the 1125 has a flasher unit/relay and the flash rate is set using either the ECU or instrument cluster....someone will surely be along to give the correct answer....

_________________
Caution: I run with scissors.


Top
   
 
 Post subject: Re: Indicators
PostPosted: Thu Jan 30, 2020 12:40 am 
Offline
Site Admin
User avatar

Joined: Wed Apr 15, 2009 5:17 pm
Posts: 8376
Location: Manchester
IC

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
   
 
 Post subject: Re: Indicators
PostPosted: Mon Mar 23, 2020 11:16 am 
Offline

Joined: Sat Aug 03, 2019 11:38 am
Posts: 13
Current ride: XB12R,FXR,1125R
Location: Catterick Garrison
I finally got this done. I fitted the new front indicators with 21 watt bulbs and they flashed too fast. I changed the bulbs for LED type bulbs and all is fine now. 😎


Top
   
 
 [ 8 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: CommonCrawl [Bot] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Limited