It is currently 29 Mar 2024 15:02

All times are UTC




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: 16 Apr 2018 16:28 
Offline

Joined: 15 Mar 2011 21:06
Posts: 14
Current ride: All sorts
Location: Swinetown
Afternoon folks

It's been 7 years since my last Buell and the opportunity for another has arisen....but it's a basket case. I'll list what is wrong with it - 06 XB12R

Basically it will only run on tickover and VERY rich. Next to no throttle response. Stinking of fuel at the exhaust. But it gets more interesting - here is what I have been told:

Riders scanned it and found no codes - yet there's an aftermarket can on there with no Lambda boss so no sensor is fitted (possible culprit no.1) sadly doesn't come with a stock part so that's something to seek out - or an appropriate aftermarket offering.

Static timing has been messed with and possibly cam timing (?!)

Compression and leakdown test on bores done - fine.

TPS valve possibly replaced

Exhaust valve disconnected

Aside from that it is rough but that's not an issue. It can be had for a bit less than what it's worth broken. Worth a stab at getting it back in order? Is there anyone I can take/send the ECM to to be checked? Is there any Buell specialists in the West Country who'd take this on that I could talk to?

Thanks chaps 8-)


Top
PostPosted: 16 Apr 2018 20:03 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8629
Location: Manchester
Probably something simple like an a temp sensor ?
Lambda sensor is on the rear header pipe not the muffler.
No such thing as a TPS valve.
Exhaust servo always disconnected with aftermarket mufflers.

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
PostPosted: 17 Apr 2018 01:16 
Offline

Joined: 15 Mar 2011 21:06
Posts: 14
Current ride: All sorts
Location: Swinetown
Thanks for chipping in, some things are good to know.

Would the engine management not have a hissy fit if the lambda was unplugged?

TPS - not valve. My typo. Doesn't have one?

Thanks for clarifying about the exhaust valve.


Top
PostPosted: 17 Apr 2018 06:30 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
You can turn error checking off in the ECM.

TPS is a sensor.

I can check your ECM for you, I am in Bristol.

Is your throttle shaft broken?

_________________
08 Specialized Langster


Top
PostPosted: 17 Apr 2018 15:18 
Offline

Joined: 15 Mar 2011 21:06
Posts: 14
Current ride: All sorts
Location: Swinetown
Hello Nick, we actually met many moons ago - you facilitated the sale of my Uly, I dropped it off to your house I believe.

The questions are prospective, not bought the bike yet as I was trying to gauge what world of grief I would be getting into so can't answer the throttle shaft question, sorry. Encouraging to know I can get the ECM checked out though, thanks.


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited