Nutah wrote:
similar to Bonzo , i don't have much interest in 1125 etc.
this is not meant to be derogatory , just not my thing.
however
unsure as the circuit if via the ecm could control other functions , or the load your intending to put on it could worse case scenario ,toast the ecm.
i would temporarily run a separate circuit (not using the ecm) to see if your fan mod works cooling wise .
as you could be making a lot of work for little return maybe .
before delving deeper into the ecm circuit wiring diagram as the load may be to great .
Thanks for that Nutah,
The aux port takes up to 10amps so should manage the fan without any trouble.
I'll give it a try tomorrow & see what happens, it can't toast the ECU, it will either work or not depending on whether the ECU will activate the auxiliary power supply.
Otherwise straight from the battery to see if it makes the cooling any better, if not I can just take it off again.
Just experimenting TBH but with the foil on the frame, the exhaust scoop & the fan I'll be very disappointed if it doesn't work.
Still got to burn some joss sticks in front of the fan to see where it blows out & other very scientific tests to carry out heh heh.