It is currently 10 Dec 2024 15:15

All times are UTC




Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next
Author Message
 Post subject: Stainless Torx
PostPosted: 28 Jun 2011 17:55 
Offline

Joined: 21 Dec 2009 21:01
Posts: 102
Location: oxon
Are stainless torx available for brake disc fixings on a Ully ? Thanks in advance.


Top
 Post subject: Re: Stainless Torx
PostPosted: 28 Jun 2011 18:26 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
cyril wrote:
Are stainless torx available for brake disc fixings on a Ully ? Thanks in advance.


Never seen aftermarket SS torx fasteners, but that aside, I don't think it is too wise to use them for brakes...

_________________
08 Specialized Langster


Top
 Post subject: Re: Stainless Torx
PostPosted: 28 Jun 2011 19:18 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
I'd agree that stainless in shear probably isn't the best material for these bolts.

_________________
If your dreams don't scare you, they are not big enough.


Top
 Post subject: Re: Stainless Torx
PostPosted: 28 Jun 2011 20:02 
Adam wrote:
I'd agree that stainless in shear probably isn't the best material for these bolts.


:?:


Top
   
 Post subject: Re: Stainless Torx
PostPosted: 28 Jun 2011 20:29 
Offline
User avatar

Joined: 06 May 2009 19:47
Posts: 389
Location: Laurel's Wessex
The Ducati WSB team use 316 (A4) stainless bolts for their disc rotors, supplied by Probolt.
316 has greater tensile strength, proof stress and elongation qualities than ordinary ferrous bolts.

I wouldn't use 'normal' A2 stainless bolts in a stress crucial application.

_________________
http://www.youtube.com/watch?v=Pbi5Ggmk ... re=related


Top
 Post subject: Re: Stainless Torx
PostPosted: 28 Jun 2011 20:47 
Offline
User avatar

Joined: 06 May 2009 18:06
Posts: 351
Location: sutton surrey
www.palmerproducts.co.uk


Top
 Post subject: Re: Stainless Torx
PostPosted: 28 Jun 2011 22:04 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
thorkill the tall wrote:
The Ducati WSB team use 316 (A4) stainless bolts for their disc rotors, supplied by Probolt.
316 has greater tensile strength, proof stress and elongation qualities than ordinary ferrous bolts.

I wouldn't use 'normal' A2 stainless bolts in a stress crucial application.


Erm, am I missing something here? UTS (Ultimate Tensile Strength) of 316 Stainless is around 500MPa whereas the UTS of High Tensile Steel (Allen screws with 12.9 stamped in them) is 1200MPa. Even SAE Grade 8 bolts (6 radial lines on the head of a hex bolt) as used on critical fasteners on Buells (brake rotors / front isolators) are over 1000MPa...

_________________
08 Specialized Langster


Top
 Post subject: Re: Stainless Torx
PostPosted: 28 Jun 2011 22:21 
Offline
User avatar

Joined: 06 May 2009 19:47
Posts: 389
Location: Laurel's Wessex
Erm... I'm not even going to bother.
Maybe I'll bother to argue the point at this year's Calne.

Enjoy this weekend.

_________________
http://www.youtube.com/watch?v=Pbi5Ggmk ... re=related


Top
 Post subject: Re: Stainless Torx
PostPosted: 28 Jun 2011 22:25 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
I was looking for enlightenment not an argument... :ugeek:

_________________
08 Specialized Langster


Top
 Post subject: Re: Stainless Torx
PostPosted: 29 Jun 2011 00:22 
Offline
Think Pink
User avatar

Joined: 07 Jun 2010 00:37
Posts: 3777
Current ride: Awesome Ulysses & X1
Location: balderton, newark
pash wrote:
cyril wrote:
Are stainless torx available for brake disc fixings on a Ully ? Thanks in advance.


Never seen aftermarket SS torx fasteners, but that aside, I don't think it is too wise to use them for brakes...

BUGGER my one of set of A2 disc rota bolts have been on for over 140000 miles .poped a stope on sunday still ok dude :shut: :rofl: :yup:

_________________
IF IT BLEEDS WE CAN KILL IT ,THIS STUFF WILL MAKE YOU A GODDAM SEXUAL TYRANASURUS ,YOUVE BEEN PUSHING TOO MANY PENCILS DILLON .GET TO THE CHOPPER


Top
 Post subject: Re: Stainless Torx
PostPosted: 29 Jun 2011 09:25 
Offline

Joined: 21 Jun 2011 15:19
Posts: 8
Current ride: XB12 Lightning
Location: Sussex
Quote:
BUGGER my one of set of A2 disc rota bolts have been on for over 140000 miles .poped a stope on sunday still ok dude :shut: :rofl: :yup:


You had me head scratching for a minute there! ......... A2, A4, high tensile yada yada.... I was stuck with wondering what a stope was! And more to the point how you pope one!!


Top
 Post subject: Re: Stainless Torx
PostPosted: 29 Jun 2011 10:28 
Offline
User avatar

Joined: 06 May 2009 19:42
Posts: 3152
Current ride: M2 Razorback
Location: Mouth of the Port in the Shire of Hamp
drillmastertommy wrote:
Quote:
BUGGER my one of set of A2 disc rota bolts have been on for over 140000 miles .poped a stope on sunday still ok dude :shut: :rofl: :yup:


You had me head scratching for a minute there! ......... A2, A4, high tensile yada yada.... I was stuck with wondering what a stope was! And more to the point how you pope one!!



:D Maybe he's a coper....

sacheus wrote:
Thought the POLICE were NOT above the law? so how fast was he going? being a coper I would have thought he should have known what white lines are...


:sp: :sp:

_________________
'98 M2 Razorback, it's a keeper.


Top
 Post subject: Re: Stainless Torx
PostPosted: 30 Jun 2011 10:24 
pash - tensile strength and shear strength are not necessarily the same thing; materials can behave differently depending on the direction and application of force.

you are not trying to stretch rotor bolts, you are trying to snap their ends off


Top
   
 Post subject: Re: Stainless Torx
PostPosted: 30 Jun 2011 10:49 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Indeed, in use you are trying to shear them, to cut through them, however I was responding to TtT's point about the material properties of 316.

In actual fact, I think you will find that the limit on how tight you can do a stainless Allen screw up for a disc will be a close run thing between rounding off the internal hex on the head and stripping the thread in the casting...

You probably know more about material properties than I...

_________________
08 Specialized Langster


Top
 Post subject: Re: Stainless Torx
PostPosted: 01 Jul 2011 16:48 
pash - doh - sorry ( and, anyway why am i trying to teach granny to suck eggz ? )

my materials science is almost 35 yrs out of date.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next

All times are UTC


Who is online

Users browsing this forum: DotNet [Bot] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited