a few of my mountain bike parts for sale on ebay
let me know if you're interested and i can remove them
i have
fox talas rl forks
shimano xt hydraulic brakes
shimano xt hollowtech cranks with azonic X pedals
pair dt swiss wheels
mavic wheels
bars
stems
headset
brake discs
fox dhx air shock
seat posts
hope seat clamp
http://www.ebay.co.uk/itm/260931148853? ... 1555.l2649
go to this link then check out the other bits
its not all listed yet cos ebay was not uploading all the pics
just let me know.

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com

Hmm... that's a bugger! I've just bought new shock, brakes and a pair of wheels for the MTB but... but... what are you looking for on the DT Swiss rims with Shimano hubs? I take it they are 26".

I could also do with a new set of bars. Mine are a bit wide but I don't really want to cut them down as they suit some of my riding, so what bars have you got?

_________________
Good in straight lines
2001 X1 "The Tart's Handbag"
2001 FZS1000 "The Fridge"

Albert

What size is the Hope clamp?
What size stem - both length and normal or oversize bars
What size discs - but I assume they are shimano centre lock?
And the rear shock - what mount to mount length is it?

Cheers
TPP

the dt swiss wheels i'd take £70 for inc postage
the hope seat clamp is 34.9mm
the shock is 215mm eye to eye
the discs are 6 bolt, front one is 204mm rear is 160mm
the bars are truvativ hussfelt 680mm wide, 40mm rise
up sweep 5 deg, back sweep 9 deg
31.8mm stem compatible
one stem is a truvativ holzfeller 31.8mm for a 1.5 inch steerer tube
60mm reach
the unbranded one is for normal size bars and steerer tube 55mm reach

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com

What bike was the Hope seat clamp on ( just to give me an idea!) it would either be going on a cotic steely or ab (old ) Orange Patriot. All, I think have 27.9 internal diameters ... need to go an buy a battery for callipers
Rear shock is 15 mm to long ... which is a shame !
Stem - 1.5 is for hard men with attitude !! I'm only a 1 1/8 man ...

So, I think I am out ....
What hubs are the DT Swiss on - an what condition??

the seat clamp was on this

i may well sell all the bits off this too
34.9 is pretty standard size
the dt wheels have specialized hubs
good condition not dents or buckles

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com

most of it finishes tonight if your'e interested
http://www.ebay.co.uk/itm/260931194456? ... 1555.l2649

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com

Needs the recall shock, and the head bearings will need replacing

_________________
Wear the fox hat

Just put a few bids in Albert ...

You going to sell the custom you built ? My Sunn is getting tired

Make him do just the one paper round......

_________________
Spencer Racing... www.spencerracing.co.uk