UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Buell S1W Items (+ XB item)
https://ukbeg.com/forum/viewtopic.php?f=10&t=13479		 Page 1 of 1
Author:  Mirmanuk [ 27 Jan 2012 22:00 ]
Post subject:  Buell S1W Items (+ XB item)
On behalf of Mev a list of Buell S1w (+ XB) items for sale:

A. Standard Ignition Module N0306.9A BHP5 00 REV A. £40
Image

B. Lightning Series Race Module 32680-96Y 6800 RPM. £75 SOLDImage

C. Ignition Pick-Up 32400-94. £20
Image

D. Ignition Coil 31614-83A. £25
Image

E. S1W Camshafts. £100
Image

F. Millennium 1250cc cylinders and pistons, complete with rings and wrist pins,
approx 600 miles old. £350
Image

G. NRHS 004-NAIL3563TSK-BH1250cc cylinders with NEW Hurricane pistons c/w piston rings and wrist pins, NRHS 003-NRHS-STG2TSLGT-Light thunderstorm stage 2 light cylinder heads, sold as a set, approx 1000 miles old. (Require adjustable pushrods). £850 SOLD
Image
Image

H. Set of S & S adjustable pushrods. £50 SOLD
Image

I. Set of standard pushrods. £25
Image

J. Set of XB rocker boxes. £75 SOLD
Image
Image

K. Rear exhaust pipe heat shield. £30 SOLD
Image
Image

L. Front Pulley and Lower drive belt guards £15
Image

M. Rear cylinder heat deflector. £10
Image

Contact Mev direct (via PM, or this thread for any other details).

Prices exclude postage costs.

(For any technical questions/queries please contact TUBBS at Moorespeed Racing who said he is happy to advise on these parts Tel. 01202 746 141)
Author:  OF [ 27 Jan 2012 23:08 ]
Post subject:  Re: Buell S1W Items (+ XB item)
I will take item K - exhaust heat shield please.... let me know how to pay.
Thanks
Author:  basti [ 29 Jan 2012 10:48 ]
Post subject:  Re: Buell S1W Items (+ XB item)
Hi
im interested in the
B. Lightning Series Race Module 32680-96Y 6800 RPM. £75
Please get in touch with me under

And let me know how to pay.
Thanks in advance
Sebastian
Author:  Dutch x1 [ 29 Jan 2012 19:16 ]
Post subject:  Re: Buell S1W Items (+ XB item)
Hi,
I'm interested in item L ( belt guards)

How much would it cost to ship to the netherlands?

Cheers,
Roy
Author:  mev [ 02 Feb 2012 12:21 ]
Post subject:  Re: Buell S1W Items (+ XB item)
Roy,
The parcel of belt guards would cost £10.31 normal delivery or £18.31 with a secure tracking service.
Author:  Chico [ 04 Feb 2012 22:05 ]
Post subject:  Re: Buell S1W Items (+ XB item)
Mev,

I'll take:
G - NRHS 004-NAIL3563TSK-BH1250cc cylinders with NEW Hurricane pistons c/w piston rings and wrist pins, NRHS 003-NRHS-STG2TSLGT-Light thunderstorm stage 2 light cylinder heads

and

H - Set of S & S adjustable pushrods

I've an M2 and these are just what I've been looking for (I'm sure they'll fit, I've checked NRHS's web site but give me a shout if you know any reason they won't).

How do you want paid? I live in Guildford - if you're down in Fareham I could pay on collection?

Let me know.

Chico
Mob: 07760-478005
Email: whitby.ian@gmail.com
Author:  Chico [ 04 Feb 2012 23:33 ]
Post subject:  Re: Buell S1W Items (+ XB item)
Mev,

I'll also take:

J. Set of XB rocker boxes

I just remembered that these will let the M2 heads vent through the top of the rocker rather than the side - so should stop it puking up so much oil.

Thanks,
Author:  mev [ 05 Feb 2012 09:43 ]
Post subject:  Re: Buell S1W Items (+ XB item)
Chico,
PM for you.

Regards
Mev
Author:  Murty [ 09 Feb 2012 22:41 ]
Post subject:  Re: Buell S1W Items (+ XB item)
Thanks for the rocker boxes
Author:  mev [ 19 Feb 2012 13:12 ]
Post subject:  Re: Buell S1W Items (+ XB item)
Hi Chico,
A pleasure to meet you. Hope you have fun with the finished result. Have sent you an email. Best regards
Mev
Author:  Chico [ 19 Feb 2012 21:12 ]
Post subject:  Re: Buell S1W Items (+ XB item)
Mev,

Likewise - thanks for the cuppa. I'll have a chat with Tubbs this week and get the NRHS barrels/heads installed in time for the TT races. Can't wait to have an engine as aggressive as the brakes & handling on my setup.

Thanks again for all the advice and if you find a set of Dymag wheels in your shed that you don't need just let me know... lOl

All the best,
Chico
Author:  Chico [ 22 Feb 2012 22:45 ]
Post subject:  Re: Buell S1W Items (+ XB item)
Mev,

Spoke to Tubbs today and will get the Buell down there this weekend. Thanks for the contact/introductions - really nice bloke and very knowledgeable.

After a bit of discussion, I'm (er, sorry, Tubbs) is going to fit the barrels and heads, set up the carb and dyno it. I'll use the standard cams as the SE 536s seem to give mixed results. I wondered about lightening & balancing the crank but lighter components (e.g. Carillo rods) are rare as Unobtanium and apparently the crank's pretty well balanced as is (unlike the rider ;) ).

He gave me some tips/ideas about improvements in the drivetrain which can yield a further 2-3bhp at the back wheel (who'd have thought it!). These are easy to do so I'll do that myself and take it back in a few weeks to stick on the dyno again.

I have 2 or 3 stainless exhaust systems (2 at 2" outlet; 1 at 2 1/2") which all need a bit of minor welding. Forgot to ask him - do you know if he welds stainless stuff?

Also thanks for the heads-up on Race Labs. I'll get down there after I've had the motor worked on. It annoys me that, despite reading up and thinking I understand the theory, I just don't seem to have the knack of setting up suspension. So time to admit defeat, get it set up properly, write down all the settings and start fiddling from that point (until it's ruined again!)...

Anyroadup, thanks for your help and take it easy.

Chico
Author:  mev [ 24 Feb 2012 13:19 ]
Post subject:  Re: Buell S1W Items (+ XB item)
Does Tubbs weld stainless? I would be amazed to find something he doesn't do. I am sure the last time I was at Moorespeed I saw him tigging something on the bench (not you Tigs!) before he started work on Beelzeebub (my little devil).
Author:  pash [ 24 Feb 2012 13:23 ]
Post subject:  Re: Buell S1W Items (+ XB item)
Yep he does, showed me some neat pipes he made for some jap 4...
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/