UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Tuber parts ,make me an offer.
https://ukbeg.com/forum/viewtopic.php?f=10&t=14233		 Page 1 of 1
Author:  Howard Morris [ 23 Apr 2012 18:56 ]
Post subject:  Tuber parts ,make me an offer.
Need the cash so all parts are up for offers.
M2 slim seat unit has 2 holes drilled in the side but will repair when sold.
Seat to fit above in good condition.
Slim M2 tank with cap and after market fuel tap,pingle?,tank has a very bad case of bubbling paint.
Fat arse M2 seat unit in silver in fair condition.
M2 rear caliper and hanger in good condition and brake pedal for same.
3 original M2 indicators.
Original M2 air filter box,if you like that sort of thing.
S1 White lightning seat unit in fair condition but has a few chips.
Leather covered seat for above.
Wanted to keep the s1 seat and unit to make an M1 but needs must so it has to go.
Also have a couple of the heat shields that fit near the rear pot on the right side if anyone wants those.
If anyone wants to do a deal on any of the above including some sort of paint job then just ask.
Cheers,H.
Author:  1stgarry [ 23 Apr 2012 19:17 ]
Post subject:  Re: Tuber parts ,make me an offer.
Is the heat-shield the same as fits an S1?
If so, is it the plastic type that hides the top of the rear cylinder?
Or the metal angled one that fits over the rear cylinder down pipe?
If the latter, please put me down for one :)
Garry
Author:  Dannyboy [ 23 Apr 2012 19:51 ]
Post subject:  Tuber parts ,make me an offer.
You have PM
Author:  Howard Morris [ 23 Apr 2012 21:08 ]
Post subject:  Re: Tuber parts ,make me an offer.
1stgarry wrote:
Is the heat-shield the same as fits an S1?
If so, is it the plastic type that hides the top of the rear cylinder?
Or the metal angled one that fits over the rear cylinder down pipe?
If the latter, please put me down for one :)
Garry

Its the one that fits over rear cylinder,not the exhaust shield,sorry.
Author:  Howard Morris [ 23 Apr 2012 21:18 ]
Post subject:  Re: Tuber parts ,make me an offer.
S1 seat unit sold.
Author:  OF [ 23 Apr 2012 21:25 ]
Post subject:  Re: Tuber parts ,make me an offer.
Howard Morris wrote:
S1 seat unit sold.


I will take the s1 seat itself as a spare if it is still available...... no worries if not, have several already but they seem to be spread around different places... :?
Author:  Ash [ 23 Apr 2012 21:31 ]
Post subject:  Re: Tuber parts ,make me an offer.
OF wrote:
Howard Morris wrote:
S1 seat unit sold.


I will take the s1 seat itself as a spare if it is still available...... no worries if not, have several already but they seem to be spread around different places... :?


I still have the two halves of your X1 belly pan .... somewhere :? :)
Author:  Howard Morris [ 23 Apr 2012 21:42 ]
Post subject:  Re: Tuber parts ,make me an offer.
OF wrote:
Howard Morris wrote:
S1 seat unit sold.


I will take the s1 seat itself as a spare if it is still available...... no worries if not, have several already but they seem to be spread around different places... :?

Sorry but the seat may already be sold ,waiting for a reply.You`ll be second in line if no sale,Cheers,H.
Author:  Howard Morris [ 23 Apr 2012 22:15 ]
Post subject:  Re: Tuber parts ,make me an offer.
Tank and brake parts sold.
Author:  Howard Morris [ 23 Apr 2012 22:50 ]
Post subject:  Re: Tuber parts ,make me an offer.
S1 seat sold.
Author:  jay irons [ 31 May 2012 22:16 ]
Post subject:  Re: Tuber parts ,make me an offer.
Fat M2 seat i might be interested in , or is that the plastics?
Author:  Howard Morris [ 09 Jun 2012 18:07 ]
Post subject:  Re: Tuber parts ,make me an offer.
jay irons wrote:
Fat M2 seat i might be interested in , or is that the plastics?
That`s plastics only for the fat M2,sorry.
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/