UK Buell Enthusiasts Group :: Tuber Twin Disc setup

UK Buell Enthusiasts Group https://ukbeg.com/forum/

Tuber Twin Disc setup https://ukbeg.com/forum/viewtopic.php?f=10&t=19030	Page 1 of 2

Author:	pash [ 12 Jul 2014 08:30 ]
Post subject:	Tuber Twin Disc setup
In an attempt to fund my indulgent purchase, I'm willing to sell on my twin disc front end... This has been on the yellow S1 and consists of: Bored M2 yokes GSXR600K7 Showa forks Tokico radial calipers EBC HH pads - less than 200 miles use EBC Pro Lite discs - less than 200 miles use - these are 320mm discs specially made for me King Carbon front mudguard The use of the Buell yokes allows standard bars and clocks to be used without issues. Note that my yellow S1 has a later engine with a speedo pickup from the gearbox and hence I have not used a speedo drive. This can be done, Beef for example has twin Pro Lite discs and uses a speedo drive so it is do-able. This front end will fit X1/S1/M2/S3 and gives lots of balanced braking power with less fade and fluid boiling... I'm looking for £600, it cost me significantly more to pull the set together, but hey...

Author:	gusm2 [ 12 Jul 2014 09:39 ]
Post subject:	Re: Tuber Twin Disc setup
wot ya buying now pash ?

Author:	DaveH [ 12 Jul 2014 16:12 ]
Post subject:	Re: Tuber Twin Disc setup
Wish you'd have done this last autumn Pash, i'd have had your hand off. My double disc beringer set up cost me a bloody fortune. You don't have an immaculate rear tuber on show 84mm caliper mount coming up for grabs by any chance ? I've been waiting a long time for your mate to fab one up. But i do have patience by the bucket full

Author:	pash [ 12 Jul 2014 16:16 ]
Post subject:	Re: Tuber Twin Disc setup
Hidden or exposed bracket?

Author:	DaveH [ 12 Jul 2014 16:26 ]
Post subject:	Re: Tuber Twin Disc setup
Exposed

Author:	DaveH [ 12 Jul 2014 21:31 ]
Post subject:	Re: Tuber Twin Disc setup
Still waiting for an answer. Tick Tock Tick Tock. Hoping you can help

Author:	richie [ 12 Jul 2014 23:54 ]
Post subject:	Re: Tuber Twin Disc setup
This time of year they unscrew his lid about 10pm.

Author:	barney [ 13 Jul 2014 01:03 ]
Post subject:	Re: Tuber Twin Disc setup
DaveH wrote: But i do have patience by the bucket full DaveH wrote: Still waiting for an answer. Tick Tock Tick Tock. Hoping you can help

Author:	pash [ 13 Jul 2014 18:43 ]
Post subject:	Re: Tuber Twin Disc setup
Provisionally sold

Author:	kevmean [ 14 Jul 2014 20:58 ]
Post subject:	Re: Tuber Twin Disc setup
That would have fitted nicely on Muffin

Author:	Maz [ 14 Jul 2014 21:02 ]
Post subject:	Re: Tuber Twin Disc setup
.......but you'd have had to finally change those completely fucked head races

Author:	kevmean [ 14 Jul 2014 21:10 ]
Post subject:	Re: Tuber Twin Disc setup

Author:	x1glider [ 17 Jul 2014 20:49 ]
Post subject:	Re: Tuber Twin Disc setup
Sounds like a peach of a kit and a steal.

Author:	WILLYBUELL [ 17 Jul 2014 21:37 ]
Post subject:	Re: Tuber Twin Disc setup
x1glider wrote: Sounds like a peach of a kit and a steal. it is

Author:	spondon440 [ 19 Jul 2014 22:25 ]
Post subject:	Re: Tuber Twin Disc setup
WILLYBUELL wrote: x1glider wrote: Sounds like a peach of a kit and a steal. it is Surely its not you that has stolen these Willy, we have come to expect you to make something better than these from a couple of cereal boxes, lol. Andy

Page 1 of 2	All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/