UK Buell Enthusiasts Group
https://ukbeg.com/forum/

XB bits for sale...
https://ukbeg.com/forum/viewtopic.php?f=10&t=19495
Page 1 of 1

Author:  drzsimon [ 17 Oct 2014 09:32 ]
Post subject:  XB bits for sale...

Got let down very badly from another forum member who wanted my XB900 in its original state, spend 4 days converting it back then he backs out :evil: ....

Just watching the car of my dreams slipping into the distance so throwing a load of stuff on ebay later, prices aren't fixed, PM me for details.

ATB

Simon

Free Spirits belt tensioner Buell XB series
You are looking at a used Freespirits adjuster, stripped, soda blasted and rebuilt. As good as new.
A few cosmetic marks on the rear and the powder coating is coming off the spring but in perfect working order.
These do wear when not adjusted properly. This was done my Maz early in its life (with receipt to prove)

£100 +post

Free Spirits Right-hand air vent.
Keep your XB 9/12/Ully rear cylinder running cool with this scoop. In very good used condition. Bit of paint flaked on the rear mounting although doesn't affect it.
£70 +post

"Reverso" silencer and interpipe. Buell XB 9/12/Ully. Custom made pipe utilising a Stainless Suzuki Bandit 1200 silencer and one-off bends. Fits straight on. Benefit of being BSAU stamped so no MoT problems. Nice and quiet on tickover and low revs, nicer at speed....
Bracket is a heavy duty thing I bent and although OK, needs powder coating, although is difficult to see under the bellypan anyway
Will fit under standard belly pan with a bit of trimming or my v. nice condition one already cut available for £50 extra. You will have to make mounting brackets for bellypan

£150 for pipe, £180 with bellypan +post

Buell XB 9/12 flyscreen.
Quite a rare beast, an original "kick ash" flyscreen, badge says XB9 but obviously fits 1200 all years.

£45 +post

Electrex Reg/rec model RR690
Only used for 100miles!
Reason for sale is I bought a Buell 1125 with a failed stator and burnt out reg/rec. I got another 09 stator and this series reg/rec to replace the shunt one fitted as standard to the Buell and Aprillia.

The 2nd hand 09 stator I bought was sold untested and it only took 100 miles before it burnt out...
I have now purchased an 08 stator and reg/rec and have no problems so the reg/rec is for sale. Absolutely as brand new, original box, instructions, packet, and invoice for £111.60 included. Obviously still under warranty.
Fits Honda: CBR600 (01-03), VFR800 (00 onwards), CB900F, CBR900RR (2001), VTR1000, CBR1100XX Blackbird (fuel inj), VTX1800C
Is fitted with longer wires (as I mounted mine on the rear hanger) so you will either have to solder on your own plug or solder and heatshrink to the 3-phase alternator wires (all the same colour anyway so can't get wrong)
contact http://www.electrexworld.co.uk for more info. Really helpful guys and gals.

Buell XB900/1200 Firebolt seat subframe including undertray and very rare tool tray as well. Great conversion for the XB900S/12Sif you want to carry a passenger. Seats have been covered in alcantera-type material and the rear has more padding in but still fits under the seat hump
Yellow plastics are in great condition, was originally blue and in fantastic condition; no cracks or scrawks. Paintjob leaves a lot to be desired and needs to be done properly but a great base for converting like I did.

£200 +post

Both bikes still for sale: XB9, 2003, FULLY rebuilt from crank bearings upwards £3000. XB12, 2004, looking very swish now with high bars, blah, blah, still £3500. Bargain...

Piccies on Face block or ebay as of 9.00pm 17/10/2014 if you don't do social media....

Author:  Charlie (Buzz) 716 [ 17 Oct 2014 10:02 ]
Post subject:  Re: XB bits for sale...

I'll take the RH airscoop :)

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/