UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Loads of Buell Bits 1125, XB , Firebolt
https://ukbeg.com/forum/viewtopic.php?f=10&t=20680		 Page 1 of 2
Author:  Dave1125 [ 18 Aug 2015 12:42 ]
Post subject:  Loads of Buell Bits 1125, XB , Firebolt
Mostly for an 1125R but I think some of the bits will fit other models:

1.Items 2-6 are all Carbon Fibre Bits all in perfect condition:
2.Front Mudguard as new
3.Footrest Heel Guards as new
4.Exhaust Heat Shield slight discolour from heat but hardy noticeable
5.Rear Hugger and Top Belt Cover (one complete unit) as new
6.Underside Belt Cover as new

Other Bits:
7.Side Full Fairing Panels in Black, perfect condition although the right inner heat shield could do with a bit of glue. These bolt straight on over the top of the standard radiator side cowlings and go lower down for the more sports bike look.
8.Jardine Alloy End Can and Link Pipe with Removable Baffle (this was off my 1st 1125r with 6k miles on so a bit of signs of use , not damaged and would clean up lovely.
9.Two Slash Cut Ends for the Standard Exhaust to give a neater look, perfect condition, they just clamp on over the original exhaust outlets.
10.Complete Twin Headlight Unit, looks new to me
11.Both left and right mirrors complete with integrated indicators and rubber gaiters, they also look new
12.Angel Eyes Kit 60mm Blue Rings with wires/relays etc (unused) from light-vision.de
13.Exhaust Flange Gaskets (unused)
14.Ignition Cover Plug in plastic/rubber and O ring (unused)
15. Black Rear Light (unused)
16.Full set of Front and Rear footrests in Black chunky Alloy (never used)
17.Venture Rack Side Rails
18.Resistor Plug (i've no idea which resistor but there is a part number if interested)
19.R and G Axle Bungs Front as new, these go through the centre of the Axles
20.R and G Axle Bungs Rear as new, as above
21.Pelacrash Crash Bungs, ive never heard of them but they do look the part, nicer than the usual R and G shaped ones (to mount on frame or engine, I've not looked where, also unused)
22.Frame Side Rail Decals, These are the large ones that go on the side of the frame with horses head motif, i think they are silver
23.Side Panel Decals, 2 sets of 2, A left and right pair, Oval Buell and Horses Head motif, again in silver
24.Leather (look) Tank Cover / Tank Bag holder this looks unused, it's got XB on the sides
25.EP Tail Tidy with Rear Led Light and rear indicator mount, perfect clean condition, tidys the rear up nicely.
26.Front and Rear Comfort Seats, also unused the front has small horses head in red on the sides the pillion has firebolt in red across the rear. I think these require the original fixings to be used.
27.Alloy reservoir covers with 1125R Highlighted on them, to replace the boring standard brake/clutch reservoir covers as new.
28.Full Workshop Manual / Book, genuine hard copy for 1125.
29.Zero Gravity Dark (almost black) Double Bubble Screen, perfect condition. Works a treat in keeping the wind off.
30.A Buell Flag, its about 5ft x 3ft in Blue with Oval Buell logo it says Buell American Motorcycle (only on one side) I believe this came from a closing down dealership.

If anyone is interested in any or a job lot of the above please contact me on 07581005293.

Thanks, Dave
Author:  Adam [ 18 Aug 2015 16:16 ]
Post subject:  Re: Loads of Buell Bits 1125, XB , Firebolt
I may be interested in some of those items - can you put the prices with them please?
Author:  motojohn [ 18 Aug 2015 20:05 ]
Post subject:  Re: Loads of Buell Bits 1125, XB , Firebolt
would be interested in the carbon hugger and the brake and clutch caps and maybe the seat
Author:  TOPGUMM [ 18 Aug 2015 23:12 ]
Post subject:  Re: Loads of Buell Bits 1125, XB , Firebolt
You can give me the buell flag for free and I`ll look after it for you. :idea:
Author:  Dave1125 [ 19 Aug 2015 06:48 ]
Post subject:  Re: Loads of Buell Bits 1125, XB , Firebolt
TOPGUMM wrote:
You can give me the buell flag for free and I`ll look after it for you. :idea:


Yes . If you pay postage, if you want it text or call me.
Author:  Dave1125 [ 19 Aug 2015 06:49 ]
Post subject:  Re: Loads of Buell Bits 1125, XB , Firebolt
motojohn wrote:
would be interested in the carbon hugger and the brake and clutch caps and maybe the seat


Could you define what you mean by 'would be' please
Author:  Dave1125 [ 19 Aug 2015 06:51 ]
Post subject:  Re: Loads of Buell Bits 1125, XB , Firebolt
Adam wrote:
I may be interested in some of those items - can you put the prices with them please?


Which items? Could you just list the numbers and I'll have a look at what they're worth and price them up or make me an offer.
Author:  Adam [ 19 Aug 2015 14:34 ]
Post subject:  Re: Loads of Buell Bits 1125, XB , Firebolt
Dave1125 wrote:
Adam wrote:
I may be interested in some of those items - can you put the prices with them please?


Which items? Could you just list the numbers and I'll have a look at what they're worth and price them up or make me an offer.


How much do want for item 7?
Author:  Dave1125 [ 19 Aug 2015 17:02 ]
Post subject:  Re: Loads of Buell Bits 1125, XB , Firebolt
Adam wrote:
Dave1125 wrote:
Adam wrote:
I may be interested in some of those items - can you put the prices with them please?


Which items? Could you just list the numbers and I'll have a look at what they're worth and price them up or make me an offer.


How much do want for item 7?


I've no idea how much they are new or even if they are still available but i'm guessing £200 would be a good buy if you want them. Say about £15 for posting.
Author:  Dave1125 [ 19 Aug 2015 17:04 ]
Post subject:  Re: Loads of Buell Bits 1125, XB , Firebolt
Front Mudguard Sold
Front Seat sold, (still got the pillion seat)
Flag gone free
Author:  Lotek [ 19 Aug 2015 17:51 ]
Post subject:  Re: Loads of Buell Bits 1125, XB , Firebolt
Hi please inbox me price for the full fairings :-)

Also what is the jardine pipe? What model?
Author:  motojohn [ 19 Aug 2015 18:12 ]
Post subject:  Re: Loads of Buell Bits 1125, XB , Firebolt
Dave1125 wrote:
motojohn wrote:
would be interested in the carbon hugger and the brake and clutch caps and maybe the seat


Could you define what you mean by 'would be' please

would be means it depends on the price
Author:  Dave1125 [ 19 Aug 2015 19:32 ]
Post subject:  Re: Loads of Buell Bits 1125, XB , Firebolt
motojohn wrote:
Dave1125 wrote:
motojohn wrote:
would be interested in the carbon hugger and the brake and clutch caps and maybe the seat


Could you define what you mean by 'would be' please

would be means it depends on the price


The hugger which also consists of the top belt cover £75
The underside belt cover £35
The 2 reservoir caps £30

plus £12 post

if you wnat the heel guards and exhaust shield you can have them for £50 too.

What do you think?
Author:  Blackrag123 [ 20 Aug 2015 09:22 ]
Post subject:  Re: Loads of Buell Bits 1125, XB , Firebolt
Money Sent Dave :yup:
Author:  Dave1125 [ 20 Aug 2015 14:45 ]
Post subject:  Re: Loads of Buell Bits 1125, XB , Firebolt
Blackrag123 wrote:
Money Sent Dave :yup:


Ok and thanks, could you text me your name and address please 07581005293, i'll look out for it coming in to my account.
Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/