| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Nissin 1/2" front master cylinder rebuild kit for XB or (98-) tuber https://ukbeg.com/forum/viewtopic.php?f=10&t=20802 |
Page 1 of 1 |
| Author: | pash [ 25 Sep 2015 13:31 ] |
| Post subject: | Nissin 1/2" front master cylinder rebuild kit for XB or (98-) tuber |
Nissin 1/2" front master cylinder rebuild kit for XB or (98-) tuber. £12.30 posted UK Story: I recently picked up a (genuine) Nissin front master cylinder rebuild kit (1/2" bore) for M4TT1982. Whilst I was there, I bought one for myself and another in case anyone wanted one. These are not available to buy for Tubers, or rather do not appear in the parts catalogue, but are listed for XBs (which use the same master cylinder internals - bot not master cylinder) as PN N0220.F and cost about £20. The Nissin ones cost £9.16 plus VAT (£11). It could be yours for £12.30 (which allows for a 90p stamp and a 40p jiffy bag). I can also get other sizes, such as 3/8" for early tubers and (maybe) 19mm for 1125s plus 12mm / 14mm / 16mm etc. to fit your jap bikes. |
|
| Author: | mev [ 25 Sep 2015 13:47 ] |
| Post subject: | Re: Nissin 1/2" front master cylinder rebuild kit for XB or (98-) tuber |
Hi Pash, If it will fit my S1 Lightning Strike then I would be very happy to buy it. |
|
| Author: | pash [ 25 Sep 2015 14:17 ] |
| Post subject: | Re: Nissin 1/2" front master cylinder rebuild kit for XB or (98-) tuber |
Yes it will |
|
| Author: | mev [ 26 Sep 2015 12:44 ] |
| Post subject: | Re: Nissin 1/2" front master cylinder rebuild kit for XB or (98-) tuber |
Hi Pash, PM sent |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|