UK Buell Enthusiasts Group
https://ukbeg.com/forum/

1125 CR For Sale
https://ukbeg.com/forum/viewtopic.php?f=10&t=24077		 Page 1 of 2
Author:  arty123 [ 04 Oct 2019 12:26 ]
Post subject:  1125 CR For Sale
My beloved Buell 1125 CR, which I have had for 9 years, is now for sale. It was practically new when I bought it, and since then a number of improvements have been added:

Twin Motorcycles ECM, now it has 144 Bwhp and 122 Nm of torque.
Oberon Clutch mod
Brembo Rear Brake caliper
Braided Oil Lines
Rotor and stator modification (oil hole and better wiring for the stator, Twin Motorcycles)
Cyclectric rectifier
Quick release pins for the seat
Gel insert in seat
Lowered footpegs
Handlebar end weights
Better rearview Mirrors with indicators
Larger additional Lexan Flyscreen
New rear tyre
New Battery
A few things I have forgotten...

Price £5,500 Buyer to arrange pickup

All original parts are available separately

It is now better than new, but I can't ride it anymore after back surgery.
If you want more pictures, pm me

Attachments:
P1040903s.JPG
P1040903s.JPG [ 563 KiB | Viewed 7018 times ]
Author:  ursus americanus [ 04 Oct 2019 14:47 ]
Post subject:  Re: 1125 CR For Sale
And from the colour and graphics it looks to be a 2010 model which makes it extra desirable with an oil level sight window and three bearing rear wheel. What's the mileage, Arty? Good luck with your sale. :yup:

Steve
Author:  arty123 [ 04 Oct 2019 22:43 ]
Post subject:  Re: 1125 CR For Sale
Hello,
The model is a 2009 I believe, as it has no oil level window and also it has a 2 bearing back wheel. It was registered in 2010. Hope this helps. The other things I added are exhaust tips and the tank insulation, adjustable levers.

Thanks Arthur
Author:  arty123 [ 04 Oct 2019 22:44 ]
Post subject:  Re: 1125 CR For Sale
Sorry, forgot to mention mileage: 5900 mostly dry miles.....

Ta, Arthur
Author:  arty123 [ 04 Oct 2019 22:46 ]
Post subject:  Re: 1125 CR For Sale
I must be getting old: Installed Galfer back disc as well.....
Author:  arty123 [ 24 Oct 2019 19:28 ]
Post subject:  Re: 1125 CR For Sale
Price now is £5000.00 including all original parts.
Author:  arty123 [ 19 Jan 2020 18:56 ]
Post subject:  Re: 1125 CR For Sale
Price now for quick sale: £4250, all parts included, even the ones I did not mention plus a TomTom Rider....
Author:  norrie [ 19 Jan 2020 22:06 ]
Post subject:  Re: 1125 CR For Sale
Oh why do people tempt me like this? It's not even very far away from me and in the right colour. 8-)
Author:  arty123 [ 20 Jan 2020 19:10 ]
Post subject:  Re: 1125 CR For Sale
Go on then, take the plunge.... Enjoy this bargain if you dare....
Author:  Adam [ 21 Jan 2020 14:59 ]
Post subject:  Re: 1125 CR For Sale
Do it Norrie. It's been sorted and remember the fun you had with the last CR ;)
Author:  t965m [ 22 Jan 2020 08:40 ]
Post subject:  Re: 1125 CR For Sale
You know you want to :yup:
Author:  Jazzbutcher [ 22 Jan 2020 09:34 ]
Post subject:  Re: 1125 CR For Sale
Who did the crankshaft oilway mod & are the stator & rectifier modded also? Thanks Paul.
Author:  Jazzbutcher [ 22 Jan 2020 09:35 ]
Post subject:  Re: 1125 CR For Sale
Jazzbutcher wrote:
Who did the crankshaft oilway mod & are the stator & rectifier modded also? Thanks Paul.


Sorry just read it properly.
Author:  deepsix [ 22 Jan 2020 11:58 ]
Post subject:  Re: 1125 CR For Sale
Good luck with sale. It looks a good one at good price. I've had mine from new (Jeez is the 10 years already?)
Apart from initial clutch slave cylinder issue at ~3000 miles and rotor stator mods it's my weapon of choice. I have KTM990, Triumph 900 and a couple of tuber Buells. The CR bring the biggest grin, currently about +17k miles.
Author:  Kiwi [ 23 Jan 2020 18:57 ]
Post subject:  Re: 1125 CR For Sale
Go on Norrie, you know you guys deserve it, you work hard enough!

Nice comfy touring seat for you both too.

I have all the Ventura gear for this too, you can have it for a fraction of the new price. (I don't need it anymore, its just gathering dust)

Spring is near!
Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/