UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Buell 1125R Drag Bike
https://ukbeg.com/forum/viewtopic.php?f=10&t=25472		 Page 1 of 1
Author:  ursus americanus [ 25 Mar 2024 16:13 ]
Post subject:  Buell 1125R Drag Bike
"2009 Buell 1125r drag bike for sale. Change of plan so letting this go. DME arm, 68" (+-2") wheelbase, with integeral air tank and nitrous bottle holder. One off s/s exhaust, extended lightweight zx14 tailpeice, Nitrous express system, 2 maps one for n/a, and one for nitrous/C16. Has run 9.4 with previous owner. Have not run myself. £5500.00 ono. Poss part ex pre 84 harley or parts."

Advertised for sale on the UKBEG Facebook page by Bean who some may remember as a very helpful parts guy at Black Bear Harley-Davidson back in the day. He's not a big Facebook fan himself but posts on there as Von Bean mainly selling parts for pre-Evo Harleys. You'll find photos of the bike there. If you have a genuine interest PM me your contact details and I'll put you in touch.

Steve
Author:  gusm2 [ 27 Mar 2024 14:41 ]
Post subject:  Re: Buell 1125R Drag Bike
I was only just talking about that on Sunday with Joe "little but quick" Elliott at the weekend
Little picture of mine as of last night :roll:

Attachments:
IMG-20240326-WA0000.jpeg
IMG-20240326-WA0000.jpeg [ 1.92 MiB | Viewed 2304 times ]
Author:  ursus americanus [ 27 Mar 2024 16:35 ]
Post subject:  Re: Buell 1125R Drag Bike
Looks a bit more than an oil change, Gus. Hope the weekend went well for you.

I know Bean chatted with Joe before buying it and had planned to race it but seems his plans have changed.

Steve
Author:  Jazzbutcher [ 27 Mar 2024 16:36 ]
Post subject:  Re: Buell 1125R Drag Bike
Hi Gus, how did the weekend go? Paul.
Author:  gusm2 [ 27 Mar 2024 21:59 ]
Post subject:  Re: Buell 1125R Drag Bike
Jazzbutcher wrote:
Hi Gus, how did the weekend go? Paul.


Well tbh I've had better ones, started off quite good then went kinda pear shaped, had a couple of mechanical niggles, but the worst was the rear base gasket going from a slight weep to a definite leak hence the strip down at the moment, thankfully I've got all the bits to sort it,
I did run against a couple of pretty fast bikes, BMW 1000 RR, R1 cross plane jobby and a ZX12 got pipped just before the Stripe by the three of them next time I think I'll try York again seeing as it's only an eighth mile :twisted: ......catch me then mofo's ;)
Author:  Nutah [ 28 Mar 2024 12:19 ]
Post subject:  Re: Buell 1125R Drag Bike
gusm2 wrote:
I was only just talking about that on Sunday with Joe "little but quick" Elliott at the weekend
Little picture of mine as of last night :roll:




Taking weight saving to a whole new level Gus ?
Author:  Jazzbutcher [ 29 Mar 2024 00:29 ]
Post subject:  Re: Buell 1125R Drag Bike
gusm2 wrote:
Jazzbutcher wrote:
Hi Gus, how did the weekend go? Paul.


Well tbh I've had better ones, started off quite good then went kinda pear shaped, had a couple of mechanical niggles, but the worst was the rear base gasket going from a slight weep to a definite leak hence the strip down at the moment, thankfully I've got all the bits to sort it,
I did run against a couple of pretty fast bikes, BMW 1000 RR, R1 cross plane jobby and a ZX12 got pipped just before the Stripe by the three of them next time I think I'll try York again seeing as it's only an eighth mile :twisted: ......catch me then mofo's ;)


I'm not sure there's much out there that will catch you over the 1/8th mile the way you catapult your Buell off the start line, it's downright impressive. Hope the rebuild goes ok buddy.
All the best Paul.
Author:  Jazzbutcher [ 29 Mar 2024 00:34 ]
Post subject:  Re: Buell 1125R Drag Bike
Nutah wrote:
gusm2 wrote:
I was only just talking about that on Sunday with Joe "little but quick" Elliott at the weekend
Little picture of mine as of last night :roll:




Taking weight saving to a whole new level Gus ?


Heh heh.
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/