UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Palmer XB Front Isolator Saver
https://ukbeg.com/forum/viewtopic.php?f=10&t=2675		 Page 1 of 1
Author:  daywalker [ 19 Sep 2009 19:48 ]
Post subject:  Palmer XB Front Isolator Saver
I bought this thinking that I would fit it after changing my front isolator but discovered that the older design rubber donut could be taken off and this did not then need the Palmer isolator saver. But all bikes made after 2004 don't have the donut so save yourself £2.20 and buy mine for a fiver posted. Just slips over the front isolater bolt nothing needs to come off and no tools needed.

Heres the weblink http://www.palmerproducts.co.uk/
Author:  daywalker [ 01 Oct 2009 22:40 ]
Post subject:  Re: Palmer XB Front Isolator Saver
Bump
Author:  zoidberg [ 02 Oct 2009 02:05 ]
Post subject:  Re: Palmer XB Front Isolator Saver
fucking hell you must be desperate if you're bumping this thread for a fiver.
Author:  Spook [ 02 Oct 2009 10:56 ]
Post subject:  Re: Palmer XB Front Isolator Saver
zoidberg wrote:
fucking hell you must be desperate if you're bumping this thread for a fiver.


Zoid can give you the fiver then you can put the saver in the bin :idea:
Author:  zoidberg [ 02 Oct 2009 19:02 ]
Post subject:  Re: Palmer XB Front Isolator Saver
Spook wrote:
zoidberg wrote:
fucking hell you must be desperate if you're bumping this thread for a fiver.


Zoid can give you the fiver then you can put the saver in the bin :idea:



Spook can piss off
Author:  daywalker [ 03 Oct 2009 23:48 ]
Post subject:  Re: Palmer XB Front Isolator Saver
Times are hard plus the damn think is sat right next to the computer.
£5 = 4 litres of white cider at corner shop = one lost weekend
Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/