UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Possible sale of performance X1 bits
https://ukbeg.com/forum/viewtopic.php?f=10&t=3168		 Page 1 of 2
Author:  GB [ 25 Oct 2009 12:54 ]
Post subject:  Possible sale of performance X1 bits
If I get enough interest I might be selling some X1 bits. I have listed some of the selection below with the cost new price next to it or N/A for no longer available or discontinued.
PM me with your offers if you are interested, enough interest and I`ll sell them.

NRHS hurricane billet front mount (the original and best) about $230+ shipping and import tax.

Metmachex Alloy oil tank. £250

Alloy rearsets with pillion pegs N/A

Banke alloy undertray, normally black but this one is polished $190+ import taxs etc from the states

AST rear shock, black nitrided version with longer hose to mount res on frame for easier adjustment, spring set for 12-14 stone rider

Buell pegasus alloy axle nut covers N/A

Stainless Buell subframe infill trim (as fitted to millenium edition) N/A

Black Buell frame plugs, (covers the swingarm bolt) N/A

Corbin seat, no longer being tooled at corbin spec order only $439 :shock:

Billet belt adjusters with paddock or crash bobbins,I think these are the only ones in the UK, got them from X-race when in Germany I

Muller power clutch about £125+shipping

Buell pro series exhaust complete system N/A

Those who know me will know the parts are or will be in great condition(some might need a clean, I rode my Buell)
Author:  ursus americanus [ 25 Oct 2009 13:20 ]
Post subject:  Re: Possible sale of performance X1 bits
All potential surplus bits from a chopper build eh, GB :roll: You deserve to be whipped and beaten but it could be worth it just to see :maz: 's face :lol:

Steve
Author:  GB [ 25 Oct 2009 14:00 ]
Post subject:  Re: Possible sale of performance X1 bits
Nothing is written in stone Steve, I need the sale of these bits first to fund the rolling chassis, I`ve wanted to build my own bike for as long as I can remember.If I don`t get enough interest I`ll have to reconsider, as much as I`d like to have two bikes I have neither the money or time to ride two.
Author:  Adam [ 25 Oct 2009 14:29 ]
Post subject:  Re: Possible sale of performance X1 bits
GB, I know I shouldn't be encouraging such non sense but I have a hard tail chopper frame with a X1 motor in it at the back of my shed. There's also a set of spoked wheels for it as well. I got these when I bought the motor for spares.
If it's any use to you, then come and unbolt the motor, send Ali a contribution to club funds and it's yours :D
I was originally going to give it to Yoffie and more recently had plans to saw it up to reuse the tubing 8-) but I'll be glad of the space.
Author:  GB [ 25 Oct 2009 15:24 ]
Post subject:  Re: Possible sale of performance X1 bits
:shock: :) Very interested Adam, I`ll have it................... Mo empty the van ;)
Author:  Adam [ 25 Oct 2009 15:49 ]
Post subject:  Re: Possible sale of performance X1 bits
:yup:
Author:  Maz [ 25 Oct 2009 16:03 ]
Post subject:  Re: Possible sale of performance X1 bits
:yc:
Author:  GB [ 25 Oct 2009 18:05 ]
Post subject:  Re: Possible sale of performance X1 bits
Takes one to know one :ner: :ner:
Author:  whitey [ 25 Oct 2009 18:57 ]
Post subject:  Re: Possible sale of performance X1 bits
PM for ya on undertray and oil tank
Author:  Maz [ 25 Oct 2009 19:22 ]
Post subject:  Re: Possible sale of performance X1 bits
So Buell announce the end after 26 years and how does GB react ?.....he decides to break the best model they ever made in order to build a totally worthless bag of shite.......way to go dumb ass :roll: :roll: :roll: :yc:
Author:  ursus americanus [ 25 Oct 2009 19:28 ]
Post subject:  Re: Possible sale of performance X1 bits
Quote:
You deserve to be whipped and beaten but it could be worth it just to see :maz: 's face :lol:

You're getting some value out of it already, GB just by talking about it :clap: Don't spoil your X1 though, it would be a waste even if it is a bit of a tart's handbag now :lol:

Steve
Author:  Adam [ 25 Oct 2009 21:08 ]
Post subject:  Re: Possible sale of performance X1 bits
.........and I feel a bit guilty encouraging you :lol:

Buy a Shitester motor and stick it in the frame :idea:
Author:  GB [ 25 Oct 2009 22:40 ]
Post subject:  Re: Possible sale of performance X1 bits
Maz wrote:
So Buell announce the end after 26 years and how does GB react ?.....he decides to break the best model they ever made in order to build a totally worthless bag of shite.......way to go dumb ass :roll: :roll: :roll: :yc:



This has nothing to do with the sad demise of Buell you opinionated judgemental tosser. Like I said if I can`t raise enough cash with the sale of the majority of those parts it won`t happen(well not at the moment anyway) building my own custom bike is something that I`ve wanted to do for years, still not sure if a ridged frame is the route I want to take especially while there are things like this being built.
Attachment:
Confederate F113 Hellcat 2.jpg
Author:  GB [ 25 Oct 2009 22:42 ]
Post subject:  Re: Possible sale of performance X1 bits
ursus americanus wrote:
You're getting some value out of it already, GB just by talking about it :clap: Don't spoil your X1 though, it would be a waste even if it is a bit of a tart's handbag now :lol:

Steve


Says he who rides a pink S1
Author:  ursus americanus [ 25 Oct 2009 22:54 ]
Post subject:  Re: Possible sale of performance X1 bits
Quote:
Says he who rides a pink S1


I only do that to wind :maz: up. I've got a pair of leather chaps you can borrow if you want :lol:

Steve
Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/