Batts Racinghas them. I understand the parts can be had individually for quite a bit less, but then one would have to know about putting them all together so they work....
But apparently, Gunter is right about ECMSpy
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| ECMSpy Lead https://ukbeg.com/forum/viewtopic.php?f=11&t=1083 |
Page 1 of 1 |
| Author: | yourguitarhero [ 16 Jun 2009 19:18 ] |
| Post subject: | ECMSpy Lead |
Hi, looking for a lead to connect my XB to the computer. |
|
| Author: | gunter [ 16 Jun 2009 19:24 ] |
| Post subject: | Re: ECMSpy Lead |
I think it's worth noting, that the Ecmspy project has come to a full stop. No software available for download any more also, so the lead might turn out a bit useless for you. |
|
| Author: | Motorrad [ 16 Jun 2009 20:20 ] |
| Post subject: | Re: ECMSpy Lead |
Batts Racinghas them. I understand the parts can be had individually for quite a bit less, but then one would have to know about putting them all together so they work.... But apparently, Gunter is right about ECMSpy
|
|
| Author: | Maz [ 16 Jun 2009 22:05 ] |
| Post subject: | Re: ECMSpy Lead |
Well Gunter would be right about EcmSpy wouldn't he.....it's his baby  I have loadsa leads in stock.....but you'll have to collect or use UKBEG post 
|
|
| Author: | Mattu [ 17 Jun 2009 13:49 ] |
| Post subject: | Re: ECMSpy Lead |
ive got one for sale - see for sale section ta matt |
|
| Author: | V-Spot [ 20 Jun 2009 19:38 ] |
| Post subject: | Re: ECMSpy Lead |
gunter wrote: I think it's worth noting, that the Ecmspy project has come to a full stop. No software available for download any more also, so the lead might turn out a bit useless for you. Just found out about it not being availible anymore, I'm gutted cos I downloaded it about 4 weeks back, but had a software issue on my PC so ditched all new downloads last week to clean everything up a isolate problem, was planning to re-upload it this evening................  So what can I do next? Cos a lead was my next job 
|
|
| Author: | gunter [ 20 Jun 2009 19:48 ] |
| Post subject: | Re: ECMSpy Lead |
Perhaps you could write a mail to the developers ... |
|
| Author: | 37skippy [ 21 Jun 2009 08:34 ] |
| Post subject: | Re: ECMSpy Lead |
so does this mean we can not use it or is it never to be updated or what? Not sure i understand whats going on as i was going to buy a lead for this purpose 
|
|
| Author: | gunter [ 21 Jun 2009 08:43 ] |
| Post subject: | Re: ECMSpy Lead |
You can use it but it will never get updated, and if you find an error - just keep it 
|
|
| Author: | 37skippy [ 21 Jun 2009 08:50 ] |
| Post subject: | Re: ECMSpy Lead |
gunter wrote: You can use it but it will never get updated, and if you find an error - just keep it so i would still be able to use it and clear/read any errors? (Sorry a bit thick in the technical department  )
|
|
| Author: | gunter [ 21 Jun 2009 09:57 ] |
| Post subject: | Re: ECMSpy Lead |
Yes, trouble codes could still be read and cleared. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|