| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| wanted right hand scoop https://ukbeg.com/forum/viewtopic.php?f=11&t=11703 |
Page 1 of 1 |
| Author: | davy(1977) [ 19 Jul 2011 18:17 ] |
| Post subject: | wanted right hand scoop |
i am after a right hand scoop for my xb12r |
|
| Author: | Davidws [ 22 Jul 2011 17:20 ] |
| Post subject: | Re: wanted right hand scoop |
p/n mo851.7aa + p/n mo852.7aa = £60.17 inc VAT from WARRs London |
|
| Author: | Davidws [ 22 Jul 2011 17:35 ] |
| Post subject: | Re: wanted right hand scoop |
Actually those parts numbers are incorrect, I was just on the phone with the dealer to order them. I will upload the diagram + p/n as soon as I receive them |
|
| Author: | pash [ 22 Jul 2011 17:42 ] |
| Post subject: | Re: wanted right hand scoop |
Are the part numbers different for 03-07 (US 03-10) and 08-10 models? What are your part numbers for? |
|
| Author: | Davidws [ 22 Jul 2011 18:16 ] |
| Post subject: | Re: wanted right hand scoop |
Those are p/n I found here: http://www.buellxb.com/Buell-XB-Forum/B ... side-scoop and they seemingly belong to the Uly comfort kit. I was actually about to post a help request, as Warr's London suggested these [12] M0902.02A8MBE – £149.21 + VAT (??!?!?!?) [13] M0903.02A8A - £12.31 + VAT but they seem to be for the LH scoop (see the diagram)  So now I'm confused.. what do I need to order to have a RH scoop identical to the LH one? |
|
| Author: | davy(1977) [ 22 Jul 2011 22:26 ] |
| Post subject: | Re: wanted right hand scoop |
it must be wrong they say its only about $40 over there |
|
| Author: | stinkerbill [ 24 Jul 2011 20:34 ] |
| Post subject: | Re: wanted right hand scoop |
Davidws wrote: p/n mo851.7aa + p/n mo852.7aa = £60.17 inc VAT from WARRs London Them's what I ordered and them's what I got fitted to my bike. 
|
|
| Author: | Davidws [ 25 Jul 2011 18:03 ] |
| Post subject: | Re: wanted right hand scoop |
Thanks Stinkerbill, Will prob go around Warrs this week to order this bad boy  and get some oil
|
|
| Author: | Davidws [ 26 Jul 2011 16:36 ] |
| Post subject: | Re: wanted right hand scoop |
Went to Warrs.. p/n mo851.7aa + p/n mo852.7aa is what comes fitted on the bike from the factory, that is the LH scoop and the RH plastic cover (as seen in the diagram). Still no idea what the p/n for the RH scoop is |
|
| Author: | pash [ 26 Jul 2011 16:47 ] |
| Post subject: | Re: wanted right hand scoop |
The 'Roberto' scoop used to be the one to have... Looked identical to the left hand scoop, balanced the bike up nicely. More than you can say for the Buell one. PM him and see if he still makes them... |
|
| Author: | stinkerbill [ 26 Jul 2011 20:04 ] |
| Post subject: | Re: wanted right hand scoop |
Trust me... you need... M0851.7AA (outer right-hand air scoop) and M0852.7AA (inner right-hand air scoop) Parts 7 and 8 on page 4 of this PDF: http://www.badweatherbikers.com/buell/documents/Buell%20Uly%20Rider%20Comfort%20Kit%20-J04927.pdf They are parts 7 and 8 of Rider Comfort Kit M1907.1AK NOT Kit M1907.1AU (that is for the police model of the Ulysses, the XP). M0851.7AA and M0852.7AA... That's what I ordered... they're the numbers on my parts... they fit... Warrs were mistaken. |
|
| Author: | ericry [ 14 Nov 2011 10:44 ] |
| Post subject: | Re: wanted right hand scoop |
Kit M1907.1AK is for NOn Cat XB12XT's 2008 and 2009 etc. Kit M1907.3AK is for CAT XB12XT's 2008 and 2009 etc. I believe I have the M1907.3AK kit fitted to mine which is way different to the other kit and the RHS scoop is a small squarish thing with no inner scoop part, just the out scoop part. This is what I was told I needed as my bike (same as UK spec I believe in Ireland) was a CAT equipped bike. I've two questions - Is my 2008 model XB12XT a CAT equipped bike ? - is the exhaust/header layout different than a on non-cat bike ??? If its the same layout then I cant see the big deal of using the nicer inner and out scoop (M0852.7AA) and (M0851.7AA).....or could I cause issues ?????? Maz or anyone able to advise ??? Eric. |
|
| Author: | pash [ 14 Nov 2011 11:08 ] |
| Post subject: | Re: wanted right hand scoop |
Yours has a catalyst and the headers are different than the non catalyst bikes. |
|
| Author: | ericry [ 16 Nov 2011 11:48 ] |
| Post subject: | Re: wanted right hand scoop |
Ok, thanks Pash - well thats that then !!! Eric. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|