Say Topgumm that good of you...
The Stand-Off part?
Not sure what you mean by that...
The indicator stalk is the Oblong type that bolts through a plastic base...
Oblong Indicator.....
PM on its way....
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Rear N/S Indicator Stalk M2..... https://ukbeg.com/forum/viewtopic.php?f=11&t=15221 |
Page 1 of 2 |
| Author: | MadRat [ 09 Aug 2012 17:01 ] |
| Post subject: | Rear N/S Indicator Stalk M2..... |
Anyone? I reversed me self into the back of me M2 in the garage getting me Beta Alp 200 out.... |
|
| Author: | TOPGUMM [ 09 Aug 2012 18:41 ] |
| Post subject: | Re: Rear N/S Indicator Stalk M2..... |
Are they the same as original S1 ones? |
|
| Author: | pash [ 09 Aug 2012 18:45 ] |
| Post subject: | Re: Rear N/S Indicator Stalk M2..... |
Yes. |
|
| Author: | TOPGUMM [ 09 Aug 2012 19:08 ] |
| Post subject: | Re: Rear N/S Indicator Stalk M2..... |
PM me your address madrat and I`ll send you a complete indicator. You don't need the stand off part for the rear on a cyclone do you. |
|
| Author: | MadRat [ 09 Aug 2012 19:47 ] |
| Post subject: | Re: Rear N/S Indicator Stalk M2..... |
Say Topgumm that good of you... The Stand-Off part? Not sure what you mean by that... The indicator stalk is the Oblong type that bolts through a plastic base... Oblong Indicator..... PM on its way.... |
|
| Author: | pash [ 09 Aug 2012 19:55 ] |
| Post subject: | Re: Rear N/S Indicator Stalk M2..... |
The front ones have the stalks...
|
|
| Author: | MadRat [ 09 Aug 2012 20:04 ] |
| Post subject: | Re: Rear N/S Indicator Stalk M2..... |
Oh..... Yes front and rear are the same with different bases on.... Front indicators go onto errrrr.... Long stalks and rear indicators go onto only a very short stalk... It is the "Indicator" I need then..... The bit with the screw hole going through it that the lens screws into...... Did I get that right? 
|
|
| Author: | TOPGUMM [ 09 Aug 2012 20:16 ] |
| Post subject: | Re: Rear N/S Indicator Stalk M2..... |
Will send it tomorrow ,only asked about the stand off as the cyclones have a different rear end. 
|
|
| Author: | MadRat [ 09 Aug 2012 21:34 ] |
| Post subject: | Re: Rear N/S Indicator Stalk M2..... |
Thanks Man.... I still don't know what a stand off is tho...  Is it the spacer that Pash is calling the Stalk? |
|
| Author: | TOPGUMM [ 09 Aug 2012 22:25 ] |
| Post subject: | Re: Rear N/S Indicator Stalk M2..... |
It is a spacer to set the indicator out more. |
|
| Author: | MadRat [ 10 Aug 2012 10:31 ] |
| Post subject: | Re: Rear N/S Indicator Stalk M2..... |
Thanks. The spacer is not required.... 
|
|
| Author: | TOPGUMM [ 10 Aug 2012 11:03 ] |
| Post subject: | Re: Rear N/S Indicator Stalk M2..... |
Posted
|
|
| Author: | gusm2 [ 10 Aug 2012 17:31 ] |
| Post subject: | Re: Rear N/S Indicator Stalk M2..... |
I'm looking for a couple of xb ones to match my rears.......I got fed up snapping them off too |
|
| Author: | MadRat [ 11 Aug 2012 12:18 ] |
| Post subject: | Re: Rear N/S Indicator Stalk M2..... |
Wot be they like then.... |
|
| Author: | gusm2 [ 11 Aug 2012 13:22 ] |
| Post subject: | Re: Rear N/S Indicator Stalk M2..... |
they bend when you brush against them, look better IMO |
|
| Page 1 of 2 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|