| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| XB12 Exhaust Valve Actuator https://ukbeg.com/forum/viewtopic.php?f=11&t=20864 |
Page 1 of 1 |
| Author: | bones [ 23 Oct 2015 22:26 ] |
| Post subject: | XB12 Exhaust Valve Actuator |
I finished fixing my exhaust cable this evening. Normal mountain bike brake cable is too thick, but gear cable works OK. When I was disconnecting the old cable I noticed the cam on the top of the exhaust valve actuator was in a strange position (too far round), so I opened it up to check the gears. One of the gears appears to have a piece of plastic broken off , although I couldn't find the broken bit (the unit is the older one S0138.1AA). So does any one have a spare actuator they want to sell me? I'm starting to think that buying an after market silencer might be a cheaper option if I can't get a good second hand actuator? But I don't want anything too loud or that affects the rideability of the bike. thanks |
|
| Author: | pash [ 24 Oct 2015 10:01 ] |
| Post subject: | Re: XB12 Exhaust Valve Actuator |
Bet loads of people have them gathering dust, however check this out: viewtopic.php?p=272621#p272621 On begay: http://www.ebay.co.uk/itm/FORD-F-150-EXPEDITION-5-4L-INTAKE-MANIFOLD-RUNNER-CONTROL-VALVE-3L3E-9G730-EA-/261841468129?hash=item3cf6f7bae1:m:mMmDke1IBb5DfRu_qKsp76A Or you may be able to match the gear up with someone like HPC: http://www.hpcgears.com/ |
|
| Author: | bones [ 24 Oct 2015 10:19 ] |
| Post subject: | Re: XB12 Exhaust Valve Actuator |
pash wrote: Bet loads of people have them gathering dust, however check this out: viewtopic.php?p=272621#p272621 On begay: http://www.ebay.co.uk/itm/FORD-F-150-EXPEDITION-5-4L-INTAKE-MANIFOLD-RUNNER-CONTROL-VALVE-3L3E-9G730-EA-/261841468129?hash=item3cf6f7bae1:m:mMmDke1IBb5DfRu_qKsp76A Or you may be able to match the gear up with someone like HPC: http://www.hpcgears.com/ Thanks Pash, yes it is the big gear attached to the cable shaft has distorted and it looks like a piece of it has broken off. I was aware that the Ford part is the same, but was trying to work out how to swap the Buell cam / cable attachment over? I'm still considering an aftermarket silencer, after watching a few videos on aftermarket exhausts, I like the look of the APH one: http://www.aph-performance-engineering.com/buell_1125_exhaust_ans_buell_xb_exhaust.html It doesn't seem too loud and looks well built, it also means I can do away with the whole exhaust valve setup too removing any repeat of the cable / actuator issues I've had recently. Hmm, decisions..... I think I'm still going to try to get a replacement actuator, even if it is for the short term, so if anyone has one they want to sell please let me know. |
|
| Author: | tubbs [ 24 Oct 2015 12:47 ] |
| Post subject: | Re: XB12 Exhaust Valve Actuator |
Hi. I have one.......... Yours for a packet of jelly babys and you pay postage? |
|
| Author: | bones [ 24 Oct 2015 14:05 ] |
| Post subject: | Re: XB12 Exhaust Valve Actuator |
tubbs wrote: Hi. I have one.......... Yours for a packet of jelly babys and you pay postage? Deal!, do you want genuine Bassetts Jelly Babies  Send me your address and paypal details (if you have any?) and I'll send money and confectionery in short order. |
|
| Author: | tubbs [ 24 Oct 2015 14:29 ] |
| Post subject: | Re: XB12 Exhaust Valve Actuator |
bones wrote: tubbs wrote: Hi. I have one.......... Yours for a packet of jelly babys and you pay postage? Deal!, do you want genuine Bassetts Jelly Babies Send me your address and paypal details (if you have any?) and I'll send money and confectionery in short order. Don't worry about jelly babys.................. im on a diet  You have pm |
|
| Author: | bones [ 24 Oct 2015 14:30 ] |
| Post subject: | Re: XB12 Exhaust Valve Actuator |
Looks like a common issue: The place mine has broken / distorted is the same place as the photos on these forums: http://www.badweatherbikers.com/buell/messages/142838/584634.html?1280749677 http://www.buellxb.com/forum/showthread.php?24217-Check-Engine-Light-Code-21-exhaust-valve-servo Basically the black part on the shaft has jumped past the tag on the gear that is supposed to retain it. |
|
| Author: | tubbs [ 24 Oct 2015 14:43 ] |
| Post subject: | Re: XB12 Exhaust Valve Actuator |
bones wrote: Looks like a common issue: The place mine has broken / distorted is the same place as the photos on these forums: http://www.badweatherbikers.com/buell/messages/142838/584634.html?1280749677 http://www.buellxb.com/forum/showthread.php?24217-Check-Engine-Light-Code-21-exhaust-valve-servo Basically the black part on the shaft has jumped past the tag on the gear that is supposed to retain it. Tbh I weld exhaust valve open, and move servo to a happy place, remove cable and off you go..... Does sweet fanny adams for performance there to pass regs............. will send Monday. 
|
|
| Author: | bones [ 24 Oct 2015 14:49 ] |
| Post subject: | Re: XB12 Exhaust Valve Actuator |
Thanks Tubbs
|
|
| Author: | tubbs [ 26 Oct 2015 13:09 ] |
| Post subject: | Re: XB12 Exhaust Valve Actuator |
Sent today
|
|
| Author: | bones [ 26 Oct 2015 18:45 ] |
| Post subject: | Re: XB12 Exhaust Valve Actuator |
tubbs wrote: Sent today Very much appreciated Tubbs. thank you
|
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|