| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| front disc for 1999 m2 https://ukbeg.com/forum/viewtopic.php?f=11&t=22998 |
Page 1 of 3 |
| Author: | a10ken [ 11 Mar 2018 09:04 ] |
| Post subject: | front disc for 1999 m2 |
hi folks, could anyone please sell me a front disc with or without carrier as i have just found a crack in mine, if not then are there any recomendations for a replacment. thanks in advance a10ken |
|
| Author: | pash [ 11 Mar 2018 09:09 ] |
| Post subject: | Re: front disc for 1999 m2 |
EBC Pro-Lite is a good replacement... |
|
| Author: | Maz [ 11 Mar 2018 10:42 ] |
| Post subject: | Re: front disc for 1999 m2 |
|
|
|
| Author: | a10ken [ 11 Mar 2018 12:04 ] |
| Post subject: | Re: front disc for 1999 m2 |
cheers.will search the dealers. |
|
| Author: | Nutah [ 11 Mar 2018 17:50 ] |
| Post subject: | Re: front disc for 1999 m2 |
not mine is this one any good ? https://www.ebay.co.uk/itm/Buell-S1-Lig ... SwNbFaoqbD |
|
| Author: | TOPGUMM [ 11 Mar 2018 18:15 ] |
| Post subject: | Re: front disc for 1999 m2 |
not really  upgrade with Pash`s recommendation, not easy to get the old one off and you`ll need the proper fixings for a new disc . Grab new pads as well.
|
|
| Author: | gusm2 [ 11 Mar 2018 19:10 ] |
| Post subject: | Re: front disc for 1999 m2 |
| Spend the extra, it's worth the pain 
|
|
| Author: | pash [ 11 Mar 2018 20:59 ] |
| Post subject: | Re: front disc for 1999 m2 |
Nutah wrote: I gave TWO of these away the other day to a chap in Germany (Basti I think). They have no place on a Buell... Saying that I am hoping they have been used for an art installation... |
|
| Author: | pash [ 11 Mar 2018 21:05 ] |
| Post subject: | Re: front disc for 1999 m2 |
a10ken wrote: cheers.will search the dealers. PN is MD734RS. The screws (dome head needed for this disc - forget the countersink ones) are expensive, however  holds the knowledge for the smart solution for such....
|
|
| Author: | Nutah [ 11 Mar 2018 21:06 ] |
| Post subject: | Re: front disc for 1999 m2 |
 
|
|
| Author: | a10ken [ 12 Mar 2018 08:30 ] |
| Post subject: | Re: front disc for 1999 m2 |
checking around and both md719rs (csk) and md734rs (ctb) are both the same price! plus i would need to buy new button head screws to fit md734rs, is there any advantage in using the later disc. brooksbarn have 719 in for £163+p/p |
|
| Author: | a10ken [ 12 Mar 2018 10:47 ] |
| Post subject: | Re: front disc for 1999 m2 |
ricerocket uk (jd motorsport) selling for £141 free postage (csk type) |
|
| Author: | pash [ 12 Mar 2018 11:55 ] |
| Post subject: | Re: front disc for 1999 m2 |
I think it’s been said already, the csk screws are a pain to remove and you’ll probably need news ones anyway. Have you tapped up regarding efficient purchase of button heads?
|
|
| Author: | a10ken [ 12 Mar 2018 12:45 ] |
| Post subject: | Re: front disc for 1999 m2 |
not yet, i will see how the old ones come out, bit of heat usually breaks the loctite bond. cheers pash. |
|
| Author: | gusm2 [ 12 Mar 2018 16:54 ] |
| Post subject: | Re: front disc for 1999 m2 |
IIRC I took the bearings out and heated from the inside..........or was that the back ones   
|
|
| Page 1 of 3 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|