It is currently 11 Dec 2024 20:15

All times are UTC




Post new topic  Reply to topic  [ 11 posts ] 
Author Message
 Post subject: project tuber wanted
PostPosted: 28 Jun 2020 22:08 
Offline
User avatar

Joined: 15 Nov 2010 20:59
Posts: 109
Current ride: Mdos
Location: Sunderland
bloody hell it's been a long time since I gave up hope of finding a buell project.
Eventually, over an extended period, I started collecting tanks, seats and other stuff to customise my own m2 but....... I just cant' bring myself to do it. Orange and pewter should not be messed with so.....

I still need a project to play with in my retirement so I'm looking for the mankey-est cosmetically shite tuber out there. Doesn't even need a seat or tank or bars or much of anything as it will be a strip and rebuild job.

Would prefer not to do any piston/crank stuff but any other faults ok!!

PM me please, just so I can see it in my messages.

PS I may not even use one of my standard tanks because my pal has an english wheel and he has offered to do a one off tank for me for the cost of the sheet!

Come on chaps get your thinking caps on!

_________________
I don't wanna tickle......... I'd rather ride ma' mode rrrr sickle !!!


Top
 Post subject: Re: project tuber wanted
PostPosted: 29 Jun 2020 00:13 
Offline
User avatar

Joined: 22 May 2009 18:43
Posts: 3274
Current ride: S1`s
Location: Llanelli South Wales
10,000 mile S1 1998 in siver Good con £4K

Start with a better option than a shitter.


Top
 Post subject: Re: project tuber wanted
PostPosted: 29 Jun 2020 19:35 
Offline
User avatar

Joined: 15 Nov 2010 20:59
Posts: 109
Current ride: Mdos
Location: Sunderland
TOPGUMM wrote:
10,000 mile S1 1998 in siver Good con £4K

Start with a better option than a shitter.



:ner: :4roz: :coat:

_________________
I don't wanna tickle......... I'd rather ride ma' mode rrrr sickle !!!


Top
 Post subject: Re: project tuber wanted
PostPosted: 29 Jun 2020 20:41 
Offline
User avatar

Joined: 22 May 2009 18:43
Posts: 3274
Current ride: S1`s
Location: Llanelli South Wales
:shock: :shock: :shock: :shock: :shock:

Good luck with a project for cost .
lOl


Top
 Post subject: Re: project tuber wanted
PostPosted: 29 Jun 2020 23:35 
Offline
User avatar

Joined: 15 Nov 2010 20:59
Posts: 109
Current ride: Mdos
Location: Sunderland
TOPGUMM wrote:
:shock: :shock: :shock: :shock: :shock:

Good luck with a project for cost .
lOl


One of the most important lessons my teachers taught me at school was always read the question and make sure you understand it before answering or you will certainly lose marks💃❤️🙊.

Hells bells man, you even got the bit wrong about PMIng me so I got an alert in my email without having to constantly refer back to the thread. :headbang: :rotfl:

_________________
I don't wanna tickle......... I'd rather ride ma' mode rrrr sickle !!!


Top
 Post subject: Re: project tuber wanted
PostPosted: 30 Jun 2020 05:17 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Perish the thought of having to come back to the forum to look at replies to your own post...

_________________
08 Specialized Langster


Top
 Post subject: Re: project tuber wanted
PostPosted: 30 Jun 2020 10:53 
Offline
User avatar

Joined: 22 May 2009 18:43
Posts: 3274
Current ride: S1`s
Location: Llanelli South Wales
pash wrote:
Perish the thought of having to come back to the forum to look at replies to your own post...


Think I`ll PM ferret to annoy him .

Also what time is 5.17 to be up in the morning posting on here , (pm me about it )


Top
 Post subject: Re: project tuber wanted
PostPosted: 30 Jun 2020 14:02 
Offline
User avatar

Joined: 15 Nov 2010 20:59
Posts: 109
Current ride: Mdos
Location: Sunderland
TOPGUMM wrote:
Think I`ll PM ferret to annoy him ....


Except you didn't PM me... you took the opportunity, again, to grandstand your rhetoric on open forum. Thank you for another flash of your psychometrics! :uhoh:

Jeeeeez :4roz:

_________________
I don't wanna tickle......... I'd rather ride ma' mode rrrr sickle !!!


Top
 Post subject: Re: project tuber wanted
PostPosted: 30 Jun 2020 14:09 
Offline
User avatar

Joined: 22 May 2009 18:43
Posts: 3274
Current ride: S1`s
Location: Llanelli South Wales
piss off


Top
 Post subject: Re: project tuber wanted
PostPosted: 30 Jun 2020 16:53 
Offline
User avatar

Joined: 15 Nov 2010 20:59
Posts: 109
Current ride: Mdos
Location: Sunderland
pash wrote:
Perish the thought of having to come back to the forum to look at replies to your own post...



"Did you cut two slices of batten-burg or only one?" Well to tell you the truth in all this excitement I kinda lost track myself. But being this is a marzipan, 4 core jammy delight, the most powerful desert cake in the world and would blow your head clean off, you've gotta ask yourself one question: "Do I feel lucky?" Well, do ya, punk?

xxxxx :ner:

_________________
I don't wanna tickle......... I'd rather ride ma' mode rrrr sickle !!!


Top
 Post subject: Re: project tuber wanted
PostPosted: 30 Jun 2020 21:11 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
TOPGUMM wrote:
pash wrote:
Perish the thought of having to come back to the forum to look at replies to your own post...


Think I`ll PM ferret to annoy him .

Also what time is 5.17 to be up in the morning posting on here , (pm me about it )

I PMed you

_________________
08 Specialized Langster


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 11 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited