Should of listened to
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| 2001 X1 wanted fully working or just the engine. https://ukbeg.com/forum/viewtopic.php?f=11&t=23626 |
Page 1 of 2 |
| Author: | sillyb [ 09 Jan 2019 14:41 ] |
| Post subject: | 2001 X1 wanted fully working or just the engine. |
X1 full bike or just engine must be 2001, fully working preferred. I would like to change the engine in my X1 as the powder coat is bubbling and really not happy with the finish. Runs perfect and is fully Mazzed just external finish is not to my satisfaction. |
|
| Author: | v2bul [ 10 Jan 2019 22:37 ] |
| Post subject: | Re: 2001 X1 wanted fully working or just the engine. |
Should of listened to
|
|
| Author: | rik [ 11 Jan 2019 11:15 ] |
| Post subject: | Re: 2001 X1 wanted fully working or just the engine. |
v2bul wrote: Should of listened to Ouch! 
|
|
| Author: | barney [ 12 Jan 2019 14:55 ] |
| Post subject: | Re: 2001 X1 wanted fully working or just the engine. |
 I can still hear the   
|
|
| Author: | DaveH [ 12 Jan 2019 20:02 ] |
| Post subject: | Re: 2001 X1 wanted fully working or just the engine. |
Nick. You want to price up having Maz strip the engine and having the powder coating dipped and bead blasted to remove it then going back to the original factory crinkle black finish and rebuilt by Maz versus the price of a 2001 X1 with a decent engine. Nobody is going to let a decent bike go for anything less than it's worth 
|
|
| Author: | XB4RT [ 13 Jan 2019 15:00 ] |
| Post subject: | Re: 2001 X1 wanted fully working or just the engine. |
Mine has been Mazzed twice Nick, much the better option and the numbers will still match. Off course there is the chance of the “I told you so” talk 
|
|
| Author: | ursus americanus [ 13 Jan 2019 16:54 ] |
| Post subject: | Re: 2001 X1 wanted fully working or just the engine. |
XB4RT wrote: Mine has been Mazzed twice Nick, much the better option and the numbers will still match. Off course there is the chance of the “I told you so” talk   Steve |
|
| Author: | DaveH [ 13 Jan 2019 21:07 ] |
| Post subject: | Re: 2001 X1 wanted fully working or just the engine. |
Steve. Who painted your S1 engine when you were at black bear. Not who stripped it but who processed all the parts for acid etching and coating ? |
|
| Author: | ursus americanus [ 14 Jan 2019 10:23 ] |
| Post subject: | Re: 2001 X1 wanted fully working or just the engine. |
DaveH wrote: Steve. Who painted your S1 engine when you were at black bear. Not who stripped it but who processed all the parts for acid etching and coating ? A long time ago now, Dave and I left Jon to project manage most of it. I think the cases were vapour blasted by a local old boy who mainly worked on classic bikes then they were repainted using factory paint by our valetter, Buzz who is a time served, professional vehicle detailer. Engine paint has stood up well although she's only had gentle use and hasn't turned a wheel in two years while waiting for a tank to be built by Holtworx then painted. It was finished last week so will be back on the road soon  Steve |
|
| Author: | rik [ 14 Jan 2019 11:21 ] |
| Post subject: | Re: 2001 X1 wanted fully working or just the engine. |
I'm picking up my crankcases today, I've had them vapour blasted and ceramic coated ('Ceracote') by these guys http://www.hi-speccoatings.co.uk in Sussex. I had previously rattle-canned them (with Simoniz wheel paint) in 2011 and it was fine... until I gunned it!...and then it started to bubble near the base of the barrels. Ceramic coating is a very fine tolerance, wet sprayed process, used on guns and even pistons... Wesley at hi-spec did the block and heads, sump, cam and timing covers, and all 4 manifolds on my AJP8 engine (think there's some pics on his faceache) and it was faultless; much of that is down to his diligence in the masking process. However, Maz was very insistant that I didn't get them 'powder coated'....as 'someone' had done ...and, as they will now return to him for the crank to be re-installed, I await his verdict with not a little trepidation. 
|
|
| Author: | x1glider [ 15 Jan 2019 18:11 ] |
| Post subject: | Re: 2001 X1 wanted fully working or just the engine. |
rik wrote: I'm picking up my crankcases today, I've had them vapour blasted and ceramic coated ('Ceracote') by these guys http://www.hi-speccoatings.co.uk in Sussex. I had previously rattle-canned them (with Simoniz wheel paint) in 2011 and it was fine... until I gunned it!...and then it started to bubble near the base of the barrels. Ceramic coating is a very fine tolerance, wet sprayed process, used on guns and even pistons... Wesley at hi-spec did the block and heads, sump, cam and timing covers, and all 4 manifolds on my AJP8 engine (think there's some pics on his faceache) and it was faultless; much of that is down to his diligence in the masking process. However, Maz was very insistant that I didn't get them 'powder coated'....as 'someone' had done ...and, as they will now return to him for the crank to be re-installed, I await his verdict with not a little trepidation. I've ceramic coated pretty much every header and muffler I've ever owned. The hit-temp chrome-like finish ones have proved the most durable. The black, not so much. Anything that kicks up off the road tends to scratch the black fairly easily and it doesn't take long for it to look dull and faded when it started of a nice pretty satin sheen (hi-temp exhaust to 2000 deg) The normal black gloss might fair better but the exhaust stuff lacked durability. For engine cases, I've actually had pretty good luck with using the texture black rattle can stuff from H-D. Some people have used the big box store sprays and the texture and sheen just isn't the same. Next to a good OEM part, the difference is obvious. |
|
| Author: | sillyb [ 16 Jan 2019 08:37 ] |
| Post subject: | Re: 2001 X1 wanted fully working or just the engine. |
I now understand that listening to  would have been the answer. Stubborn stupid or Silly didn’t work and that’s why I’m looking for another engine. Max is against getting it stripped and dipped/blasted as would probably knack all the seals etc. Getting it rattle canned by proper h/d paint would be the only option, now finding someone to do this to the correct consistency wouldn’t be easy. If they didn’t coat it right I’m back to square one again This bike has done over 50,000 miles and is rode fairly hard so how long before it needs attention. New engine getting fully ed is where I’m going as egg is not being wiped of again! At 60 I think one last blast at getting it right to see me till  but there’s still plenty left in the tank at the moment. Hope don’t retire before it’s finnished. 
|
|
| Author: | Bonzo [ 16 Jan 2019 10:11 ] |
| Post subject: | Re: 2001 X1 wanted fully working or just the engine. |
When you say you're looking for a 2001 model can I assume after reading this thread that you are specifically after a black engine ?? I say this cos I have a 2001 X1, but apparently it's a 2002 model registered in 2001 (according to the thread link at the end of this), and doesn't have a fully black engine. If this is the case my cunning plan won't work. http://www.ukbeg.com/forum/viewtopic.php?f=10&t=23089 |
|
| Author: | Adam [ 16 Jan 2019 12:12 ] |
| Post subject: | Re: 2001 X1 wanted fully working or just the engine. |
sillyb wrote: Hope don’t retire before it’s finnished. I wouldn't worry, he's the Keith Richards of the Buell world
|
|
| Author: | sillyb [ 16 Jan 2019 12:57 ] |
| Post subject: | Re: 2001 X1 wanted fully working or just the engine. |
According to the 2001 model has all the mods and is the best X1, that’s enough for me to go down that road. Yes I do want the totally black engine model.
|
|
| Page 1 of 2 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|