With post, import duty, currency exchange and handling it will creep up.
There`s a couple of bits I`d like from them , but they work out too expensive in the end .
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Isolators https://ukbeg.com/forum/viewtopic.php?f=11&t=24620 |
Page 1 of 1 |
| Author: | hassle [ 20 Sep 2020 21:36 ] |
| Post subject: | Isolators |
Awrite boys an girls, been after the swing arm isolators and the front one for the S3T as I’m doin a major strip and rebuild. Any ideas ? I’ve seen some on eBay but they want fortunes for em, btw still got loads of bits for the xb9 |
|
| Author: | TOPGUMM [ 20 Sep 2020 22:51 ] |
| Post subject: | Re: Isolators |
St Pauls in Minesota https://st-paul-harley-davidson-buell.m ... frames-kit |
|
| Author: | hassle [ 21 Sep 2020 00:42 ] |
| Post subject: | Re: Isolators |
Ta mate I’ll give it a try.. |
|
| Author: | TOPGUMM [ 21 Sep 2020 08:57 ] |
| Post subject: | Re: Isolators |
With post, import duty, currency exchange and handling it will creep up. There`s a couple of bits I`d like from them , but they work out too expensive in the end .
|
|
| Author: | 03 [ 21 Sep 2020 09:52 ] |
| Post subject: | Re: Isolators |
Refer your other post. Riders in Bristol will supply parts with UKBEG discount on request. Decent folks there. |
|
| Author: | TOPGUMM [ 21 Sep 2020 12:31 ] |
| Post subject: | Re: Isolators |
Isolators are expensive there too. |
|
| Author: | 03 [ 21 Sep 2020 12:53 ] |
| Post subject: | Re: Isolators |
TOPGUMM wrote: Isolators are expensive there too. They are, but you don't get a discount anywhere else that I know of. False economy to buy the original type which are readily available and most likely the cheap ones you see offered. |
|
| Author: | TOPGUMM [ 21 Sep 2020 13:08 ] |
| Post subject: | Re: Isolators |
St Pauls are the later ones . RH ones seem to be the problem for supply. |
|
| Author: | 03 [ 21 Sep 2020 15:46 ] |
| Post subject: | Re: Isolators |
TOPGUMM wrote: St Pauls are the later ones . RH ones seem to be the problem for supply. Perfect, just a matter of availability and economics. |
|
| Author: | hassle [ 24 Sep 2020 17:33 ] |
| Post subject: | Re: Isolators |
Thanks fellas, it’s a pity we can’t get together and have a bunch of service stuff made. Most of it costs pennies to manufacture... a friend of mine has parts for hot rods made in China, 100 at a time and costs him Virtually nothing.. |
|
| Author: | M4TT1982 [ 20 Oct 2020 17:58 ] |
| Post subject: | Re: Isolators |
Did you get sorted? |
|
| Author: | hassle [ 14 Nov 2020 15:50 ] |
| Post subject: | Re: Isolators |
Yep got sorted... http://cgi.ebay.com/ebaymotors/ws/eBayI ... _adv=false Cost me £42 With the import tax an postage Which was nice... but took an age to get ere 👍 |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|