you can put the race prog onto a standard ecm if its pre 08 ? IIRC ask Pash
saves buying the race ecm unit
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Race ecm https://ukbeg.com/forum/viewtopic.php?f=11&t=2483 |
Page 1 of 1 |
| Author: | Dewalt [ 07 Sep 2009 08:17 ] |
| Post subject: | Race ecm |
Looking for my mate Speedy; a race ecm XB 12. |
|
| Author: | Nutah [ 07 Sep 2009 08:25 ] |
| Post subject: | Re: Race ecm |
you can put the race prog onto a standard ecm if its pre 08 ? IIRC ask Pash saves buying the race ecm unit
|
|
| Author: | Dirty John [ 07 Sep 2009 10:54 ] |
| Post subject: | Re: Race ecm |
I've got a 2006 XB12R standard ECM if you need it |
|
| Author: | Dewalt [ 07 Sep 2009 14:07 ] |
| Post subject: | Re: Race ecm |
Dirty John wrote: I've got a 2006 XB12R standard ECM if you need it Thanks a million, but it's got to be a race one. |
|
| Author: | pash [ 07 Sep 2009 16:33 ] |
| Post subject: | Re: Race ecm |
Why? Why not a standard one with the race content? |
|
| Author: | Dirty John [ 07 Sep 2009 16:43 ] |
| Post subject: | Re: Race ecm |
Yes why, just flash a standard ECM with another map, do you much the race ECM is to buy? - that will change your mind |
|
| Author: | 37skippy [ 07 Sep 2009 17:39 ] |
| Post subject: | Re: Race ecm |
That sounds good,race internals in a standard ecm......who do i see?how do i do it? give me some info please Cheers 
|
|
| Author: | speedy [ 07 Sep 2009 18:43 ] |
| Post subject: | Re: Race ecm |
i have some problems with ecm spy ,i tried to remap the race ecm , but after that the bike will not run propely, it will not run idle  
|
|
| Author: | pash [ 07 Sep 2009 20:15 ] |
| Post subject: | Re: Race ecm |
Maybe you need a TPS reset. There should be no reason why it wont idle, it is closed loop.... |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|