X1 Speed Sensor

[conquistador]

Anyone got an unwanted spare or know of an equivalent replacement? The only ones I can find are silly money in USA

[gusm2]

Pm sent

[conquistador]

👍

[Nutah]

Have you done the mod , to reduce the voltage to it too ?

[conquistador]

I did it on my M2 many years ago, not sure if it has been done on the X1. may be able to answer that

[Nutah]

[conquistador]

To add to the mystery, went out for a few hours on it yesterday. At first it was really erratic (I was hoping for erotic) with a lot of bouncing and reading low. After an hour or so it settled down and worked perfectly followed by a slight bounce and drop off near the end. Each change seemed to coincide with stopping and setting off again

[conquistador]

Wiring mod now done, a bit more fiddly than the M2. I'll try with the new sensor and see how it goes 🤞

[Nutah]

from what i remember , it stops the sensor from getting a voltage spike
so stops it toasting the sensor

[conquistador]

I concur, from Maz and other reading, 5 volts is sufficient for it to function.

[conquistador]

Another test, bypassed the Speedo Healer and my speedo now works perfectly, albeit too high now.
Does anyone have a working speedo healer lying around, or any easy way to test and repair mine?