I did it on my M2 many years ago, not sure if it has been done on the X1.
may be able to answer that
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| X1 Speed Sensor https://ukbeg.com/forum/viewtopic.php?f=11&t=24973 |
Page 1 of 1 |
| Author: | conquistador [ 20 Sep 2021 17:06 ] |
| Post subject: | X1 Speed Sensor |
Anyone got an unwanted spare or know of an equivalent replacement? The only ones I can find are silly money in USA |
|
| Author: | gusm2 [ 20 Sep 2021 20:53 ] |
| Post subject: | Re: X1 Speed Sensor |
Pm sent |
|
| Author: | conquistador [ 20 Sep 2021 20:57 ] |
| Post subject: | Re: X1 Speed Sensor |
👍 |
|
| Author: | Nutah [ 20 Sep 2021 21:23 ] |
| Post subject: | Re: X1 Speed Sensor |
Have you done the mod , to reduce the voltage to it too ? |
|
| Author: | conquistador [ 21 Sep 2021 10:41 ] |
| Post subject: | Re: X1 Speed Sensor |
I did it on my M2 many years ago, not sure if it has been done on the X1. may be able to answer that
|
|
| Author: | Nutah [ 21 Sep 2021 23:22 ] |
| Post subject: | Re: X1 Speed Sensor |
|
|
| Author: | conquistador [ 22 Sep 2021 09:37 ] |
| Post subject: | Re: X1 Speed Sensor |
To add to the mystery, went out for a few hours on it yesterday. At first it was really erratic (I was hoping for erotic) with a lot of bouncing and reading low. After an hour or so it settled down and worked perfectly followed by a slight bounce and drop off near the end. Each change seemed to coincide with stopping and setting off again  
|
|
| Author: | conquistador [ 23 Sep 2021 17:24 ] |
| Post subject: | Re: X1 Speed Sensor |
Wiring mod now done, a bit more fiddly than the M2. I'll try with the new sensor and see how it goes 🤞 |
|
| Author: | Nutah [ 23 Sep 2021 18:41 ] |
| Post subject: | Re: X1 Speed Sensor |
| from what i remember , it stops the sensor from getting a voltage spike so stops it toasting the sensor |
|
| Author: | conquistador [ 23 Sep 2021 19:24 ] |
| Post subject: | Re: X1 Speed Sensor |
I concur, from Maz and other reading, 5 volts is sufficient for it to function. |
|
| Author: | conquistador [ 08 Oct 2021 19:07 ] |
| Post subject: | Re: X1 Speed Sensor |
Another test, bypassed the Speedo Healer and my speedo now works perfectly, albeit too high now. Does anyone have a working speedo healer lying around, or any easy way to test and repair mine? |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|