UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
Maz nipple plug https://ukbeg.com/forum/viewtopic.php?f=11&t=25512 |
Page 1 of 1 |
Author: | TRS666 [ 30 Jun 2024 08:51 ] |
Post subject: | Maz nipple plug |
If someone has one laying around would need one. |
Author: | TOPGUMM [ 30 Jun 2024 22:51 ] |
Post subject: | Re: Maz nipple plug |
Can a nipple just be screwed into a small pilot hole in normal seal ? ![]() |
Author: | brother in buells [ 30 Jun 2024 23:11 ] |
Post subject: | Re: Maz nipple plug |
TOPGUMM wrote: Can a nipple just be screwed into a small pilot hole in normal seal ? ![]() It could be possible with a ring in between and a counter nut on the inside , but its a very flimsy seal. |
Author: | TRS666 [ 01 Jul 2024 06:14 ] |
Post subject: | Re: Maz nipple plug |
Thought of that possibility also if i can“t buy or get one made. Or just pull the plastic plug, fill with LM grease and put a new plastic plug there. Do this once a year would probably be good enough with my mileage. |
Author: | TOPGUMM [ 01 Jul 2024 20:38 ] |
Post subject: | Re: Maz nipple plug |
They are 32.03mm ish and 5mm ish thick ![]() |
Author: | TRS666 [ 01 Jul 2024 20:53 ] |
Post subject: | Re: Maz nipple plug |
TOPGUMM wrote: They are 32.03mm ish and 5mm ish thick ![]() Thanks, good to know if i find someone with a lathe. |
Author: | brother in buells [ 19 Jun 2025 20:34 ] |
Post subject: | Re: Maz nipple plug |
TRS666 wrote: If someone has one laying around would need one. Did you get one made or bought from Spondon 440 in the meantime? |
Author: | TRS666 [ 20 Jun 2025 07:45 ] |
Post subject: | Re: Maz nipple plug |
Found someone (Andrew Franchi) on the Facebook site selling them. |
Author: | barney [ 20 Jun 2025 20:10 ] |
Post subject: | Re: Maz nipple plug |
TRS666 wrote: Found someone (Andrew Franchi) on the Facebook site selling them. ![]() ![]() |
Author: | brother in buells [ 20 Jun 2025 20:24 ] |
Post subject: | Re: Maz nipple plug |
Yes that's Spondon 440 He also sells the piece that replaces the plastic from the fuel cap. It's worth it to get that one to! |
Page 1 of 1 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |