UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
clutch plates https://ukbeg.com/forum/viewtopic.php?f=11&t=7173 |
Page 1 of 1 |
Author: | Martinwill [ 21 Jun 2010 10:01 ] |
Post subject: | clutch plates |
i am going to get rid of the so called grenade plate from my x1 before it goes pop, needed are 2 metal plates and one friction plate if anyone has some spare. thanks. |
Author: | Beef [ 21 Jun 2010 12:00 ] |
Post subject: | Re: clutch plates |
Who told you the clutches are dodgy? If kept adjusted correctly and you don't abuse the clutch by permanently slipping it, you will be fine. I wanted an uprated clutch after destroying my first one (I slipped it loads and never adjusted it regularly-this was before I found this place) Maz talked me out of it, and on inspecting my 10000 mile old clutch, he said it looked like new. Ive done a few mods to the motor so a bit more power than standard and it's coping fine, it now has 30000miles on the clutch!! HTH ![]() |
Author: | Martinwill [ 22 Jun 2010 09:42 ] |
Post subject: | Re: clutch plates |
Badweb, few horror stories floating around on there. thought it would be an easy fix just in case. |
Author: | Beef [ 22 Jun 2010 20:22 ] |
Post subject: | Re: clutch plates |
I know there was a few issues with the XB clutches but none AFAIK with X1s |
Page 1 of 1 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |