I've got some. PM me your address
...........and I left you a phone message
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Button head alan screws 3/16ths https://ukbeg.com/forum/viewtopic.php?f=11&t=8880 |
Page 1 of 1 |
| Author: | restone [ 29 Oct 2010 13:25 ] |
| Post subject: | Button head alan screws 3/16ths |
I need 4 button head alan screws (stainless) 3/16ths x 3/8ths UNC, length not too much of an issue as i can cut em down. (holds end of V&H can in) Usually get this sort of stuff from Custom fasteners but they don't stock them. Anyone got any or no where I could get get some from. Cheers Rich |
|
| Author: | Adam [ 29 Oct 2010 14:11 ] |
| Post subject: | Re: Button head alan screws 3/16ths |
I've got some. PM me your address ...........and I left you a phone message
|
|
| Author: | Robs [ 29 Oct 2010 16:57 ] |
| Post subject: | Re: Button head alan screws 3/16ths |
restone wrote: I need 4 button head alan screws (stainless) 3/16ths x 3/8ths UNC, length not too much of an issue as i can cut em down. (holds end of V&H can in) Usually get this sort of stuff from Custom fasteners but they don't stock them. Anyone got any or no where I could get get some from. Cheers Rich Stigs fasteners http://www.a2stainless.co.uk/ down today tho' |
|
| Author: | thorkill the tall [ 29 Oct 2010 19:25 ] |
| Post subject: | Re: Button head alan screws 3/16ths |
Robs wrote: restone wrote: I need 4 button head alan screws (stainless) 3/16ths x 3/8ths UNC, length not too much of an issue as i can cut em down. (holds end of V&H can in) Usually get this sort of stuff from Custom fasteners but they don't stock them. Anyone got any or no where I could get get some from. Cheers Rich Stigs fasteners http://www.a2stainless.co.uk/ down today tho' Stigs allegedly get all thier Imperial fasteners from this place: http://www.nutz4bikes.co.uk/ |
|
| Author: | pash [ 29 Oct 2010 20:00 ] |
| Post subject: | Re: Button head alan screws 3/16ths |
thorkill the tall wrote: Stigs allegedly get all thier Imperial fasteners from this place: http://www.nutz4bikes.co.uk/[/quote] Is that why they don't list any? 
|
|
| Author: | thorkill the tall [ 29 Oct 2010 20:19 ] |
| Post subject: | Re: Button head alan screws 3/16ths |
pash wrote: thorkill the tall wrote: Stigs allegedly get all thier Imperial fasteners from this place: http://www.nutz4bikes.co.uk/ Is that why they don't list any? Yes, I noticed that too, but only after I posted. Still, it's not too difficult to pick up a telephone and order things that way. Incidentally, Stevens produce many of their fasteners in house. My only experience of Stigs, by the way, was not too special. It concerned a 'full kit' for an S1, of which many of the fasteners were of the wrong thread form or the wrong length. |
|
| Author: | pash [ 29 Oct 2010 20:49 ] |
| Post subject: | Re: Button head alan screws 3/16ths |
thorkill the tall wrote: Still, it's not too difficult to pick up a telephone and order things that way. What??? No way, I only do email, texting, MSN and Facebook... thorkill the tall wrote: Incidentally, Stevens produce many of their fasteners in house. Who are Stevens? |
|
| Author: | Adam [ 29 Oct 2010 21:18 ] |
| Post subject: | Re: Button head alan screws 3/16ths |
pash wrote: Who are Stevens?  
|
|
| Author: | Adam [ 29 Oct 2010 21:21 ] |
| Post subject: | Re: Button head alan screws 3/16ths |
restone wrote: I need 4 button head alan screws (stainless) 3/16ths x 3/8ths UNC, length not too much of an issue as i can cut em down. (holds end of V&H can in) Usually get this sort of stuff from Custom fasteners but they don't stock them. Anyone got any or no where I could get get some from. Cheers Rich Good Met for tomorrow pm  Mrs Adam and me might nip around for tea + tiffin
|
|
| Author: | thorkill the tall [ 29 Oct 2010 21:52 ] |
| Post subject: | Re: Button head alan screws 3/16ths |
pash wrote: Who are Stevens? Look at the page header when you open the link. G.M. Stevens aka Nutz4Bikes. |
|
| Author: | pash [ 29 Oct 2010 22:31 ] |
| Post subject: | Re: Button head alan screws 3/16ths |
|
|
| Author: | Adam [ 30 Oct 2010 17:10 ] |
| Post subject: | Re: Button head alan screws 3/16ths |
Adam wrote: restone wrote: I need 4 button head alan screws (stainless) 3/16ths x 3/8ths UNC, length not too much of an issue as i can cut em down. (holds end of V&H can in) Usually get this sort of stuff from Custom fasteners but they don't stock them. Anyone got any or no where I could get get some from. Cheers Rich Good Met for tomorrow pm Mrs Adam and me might nip around for tea + tiffin You're never in when I call around - have you been evicted   I put the bolts through your letter box 
|
|
| Author: | Maz [ 30 Oct 2010 18:05 ] |
| Post subject: | Re: Button head alan screws 3/16ths |
He was at mine
|
|
| Author: | Motorrad [ 30 Oct 2010 18:39 ] |
| Post subject: | Re: Button head alan screws 3/16ths |
Adam wrote: I put the bolts through your letter box Did you pee in there, too? |
|
| Author: | Adam [ 30 Oct 2010 20:02 ] |
| Post subject: | Re: Button head alan screws 3/16ths |
Motorrad wrote: Adam wrote: I put the bolts through your letter box Did you pee in there, too? Yes, only coz no one was home to stab me
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|