PM me if you still need Sportster
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| 1125 throttle cables https://ukbeg.com/forum/viewtopic.php?f=11&t=9847 |
Page 1 of 1 |
| Author: | sportster_mann [ 06 Feb 2011 20:56 ] |
| Post subject: | 1125 throttle cables |
I don't suppose anybody has a pair of throttle cables that they are prepared to part with ? IIRC they are the same for both R and CR with the clubman bars - so perhaps somebody has a set knocking about if they've upgraded to high bars. The part numbers are N0307A.1AM and N0308A.1AM - don't know if they are the same as XB models though. Having trouble with my R throttle sticking - looks to be the cables at fault. |
|
| Author: | Blackrag123 [ 14 Feb 2011 13:38 ] |
| Post subject: | Re: 1125 throttle cables |
PM me if you still need Sportster
|
|
| Author: | Avalaugh [ 15 Feb 2011 06:50 ] |
| Post subject: | 1125 throttle cables |
I had same problem, found to be the rubber boot that goes round the throttle bodies/bottom of airfilter box. It was rubbing the right hand side butterfly link arms towards the front of the bike. But only after alot of fiddling with the cable adjustment did i notice it. Trim the underside of the rubber lip with a knife, I could see a very slight rub mark, the boot is shaped already to avoid this happening, but obviously it's a close tolerance and mine had somehow dropped half a mm or so ? Let me know if this works, 5 minute job, probably going to be another 1125 quirk 
|
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|