I've searched for "rotate engine" on the forum and can't fone an actual thread with that in the title.
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| XB header removal https://ukbeg.com/forum/viewtopic.php?f=17&t=20432 |
Page 1 of 1 |
| Author: | FerrisBueller [ 25 Jun 2015 11:28 ] |
| Post subject: | XB header removal |
I watched this vid: http://m.youtube.com/watch?v=WxozheEre64 And as far as I can tell, the swing arm was dropped and fan removed, only to remove the o2 sensor, as he accessed the header bolts from under the frame, not utilising the space created from removing the fan. Is this really the only way of removing the o2 sensor? It looks like the o2 sensor could be undone from under the frame too, and if so, why drop the swingers? I need to replace my headers, but have no engine hoist or garage rafters to hang my bike from. |
|
| Author: | Maz [ 25 Jun 2015 12:19 ] |
| Post subject: | Re: XB header removal |
Rotate the engine out of the frame......easy peasy IMO. |
|
| Author: | FerrisBueller [ 25 Jun 2015 15:29 ] |
| Post subject: | Re: XB header removal |
I've searched for "rotate engine" on the forum and can't fone an actual thread with that in the title.
|
|
| Author: | marcus_asparagus [ 25 Jun 2015 17:12 ] |
| Post subject: | Re: XB header removal |
Here you go.........as Maz says easy peasy, with pics! http://www.buellxb.com/Buell-XB-Forum/D ... -With-Pics Enjoy and good luck. |
|
| Author: | nickyb [ 21 May 2017 15:31 ] |
| Post subject: | Re: XB header removal |
 Headers removed, both wheels on the floor, no rotation, no hanging from the rafters, only thing I can say is, these XB's make a hell of alot of bits, and patience is something you need bucket loads of. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|