UK Buell Enthusiasts Group :: ECM Tuning..

is it just me that thinks all this computerised bike onboard brain stuff is bollocks :?:

Needing a lap top to sort a bike isn't much fun when you're stranded.... oh for the days when you set your timing with a Rizla paper.......

But then again, what do I know about bikes....... :?:

Philgood wrote:

As my Buell race exhaust can has no active valve, can I remove the cable and control unit in the airbox?

:worthy:

Yes, and mute the error reporting. See the How To. I may even update it for 08/09/10 bikes...

Philgood wrote:

As my Buell race exhaust can has no active valve, can I remove the cable and control unit in the airbox?

:worthy:

Yes, and mute the error reporting. See the How To. I may even update it for 08/09/10 bikes...

So, the question is, what do you want to do with ECMSpy?

There are plenty of solutions...

When you have got all this working, let me know, then we can start work

Using your cable, use ECMRead to get your EEPROM data...

I am at work and have no access to it at the moment, so you are going to have to try and figure out how to get it working.

Cool, so that means you have a BUEYD firmware.

For that firmware, go here - http://www.ecmspy.com/cgi-bin/ecm.cgi?ecm=89 - and export the TunerPro V4 Bin-Definition to you machine.

Then, start TunerPro up, open the XDF file (I can't see TunerPro from here but I think it is the second menu item along from the left), then open the binary file (first menu item - in the dialogue box to open the file, make sure you select the *.*), BUEYDOL 403-20-08.xpr.

Then, you will see all the tables and constants int he windows on the left...

Let us know when you get that far...

Cancel the exhaust valve actuator fault reporting..
Stop my Buell race can popping on over run..
And Improve idle and get the engine to run smoothly..like yours maybe!

So you wanted to:

Philgood wrote:

Cancel the exhaust valve actuator fault reporting..
Stop my Buell race can popping on over run..
And Improve idle and get the engine to run smoothly..like yours maybe!

So lets start with the first issue; in the Flags/Switches window, scroll down till you find Error Mask Byte 4: AMCxxx

Double click all the AMC related ones and untick the tick box...

Then Save Bin As.... under a different name...

MAKE SURE YOU HAVE YOUR ORIGINAL EEPROM CONTENT SAVED SOMEWHERE SAFE

Since we are doing one thing at a time, use ECMRead to burn the EEPROM content back to your ECM...

Author:	wobbly [ 08 May 2010 06:54 ]
Post subject:	Re: ECM Tuning..
spen wrote: is it just me that thinks all this computerised bike onboard brain stuff is bollocks Needing a lap top to sort a bike isn't much fun when you're stranded.... oh for the days when you set your timing with a Rizla paper....... But then again, what do I know about bikes....... and a piece of rizla packet doubled up for the plug gap. Cheers, Richard.

Author:	Philgood [ 08 May 2010 08:45 ]
Post subject:	Re: ECM Tuning..
pash wrote: Philgood wrote: As my Buell race exhaust can has no active valve, can I remove the cable and control unit in the airbox? Yes, and mute the error reporting. See the How To. I may even update it for 08/09/10 bikes... Thanks Pash...mine is an 08 bike ..

Author:	Philgood [ 26 May 2010 19:43 ]
Post subject:	Re: ECM Tuning..
pash wrote: Philgood wrote: As my Buell race exhaust can has no active valve, can I remove the cable and control unit in the airbox? Yes, and mute the error reporting. See the How To. I may even update it for 08/09/10 bikes... Just received my cable from Mike at Xopti.. Now I'm confused..I emailed Gunter for a copy of ecmspy and he replied there is no version of ecmspy for >08 models.. ????

Author:	pash [ 26 May 2010 21:04 ]
Post subject:	Re: ECM Tuning..
So, the question is, what do you want to do with ECMSpy? There are plenty of solutions...

Author:	Philgood [ 26 May 2010 21:19 ]
Post subject:	Re: ECM Tuning..
pash wrote: So, the question is, what do you want to do with ECMSpy? There are plenty of solutions... Cancel the exhaust valve actuator fault reporting.. Stop my Buell race can popping on over run.. And Improve idle and get the engine to run smoothly..like yours maybe! Thanks!

UK Buell Enthusiasts Group https://ukbeg.com/forum/

ECM Tuning.. https://ukbeg.com/forum/viewtopic.php?f=7&t=6075	Page 2 of 7

Author:	pash [ 26 May 2010 21:29 ]
Post subject:	Re: ECM Tuning..
Go here - http://www.ecmspy.com/download.shtml - and download ECMRead Then go here - http://www.tunerpro.net/downloadApp.htm - and download TunerPro Back in a bit...

Author:	pash [ 26 May 2010 21:31 ]
Post subject:	Re: ECM Tuning..
And get yourself Mono Runtime Environment here - http://www.go-mono.com/mono-downloads/download.html - otherwise ECMRead wont work...

Author:	Philgood [ 27 May 2010 10:08 ]
Post subject:	Re: ECM Tuning..
pash wrote: When you have got all this working, let me know, then we can start work All software loaded..kettle's on! ready to go..

Author:	pash [ 27 May 2010 10:38 ]
Post subject:	Re: ECM Tuning..
Using your cable, use ECMRead to get your EEPROM data... I am at work and have no access to it at the moment, so you are going to have to try and figure out how to get it working.

Author:	Philgood [ 27 May 2010 14:21 ]
Post subject:	Re: ECM Tuning..
pash wrote: Using your cable, use ECMRead to get your EEPROM data... I am at work and have no access to it at the moment, so you are going to have to try and figure out how to get it working. Didnt work at first but realised I was using wrong com port and needed ignition on! Downloaded a file called BUEYDOL 403-20-08..

Author:	pash [ 27 May 2010 15:27 ]
Post subject:	Re: ECM Tuning..
Cool, so that means you have a BUEYD firmware. For that firmware, go here - http://www.ecmspy.com/cgi-bin/ecm.cgi?ecm=89 - and export the TunerPro V4 Bin-Definition to you machine. Then, start TunerPro up, open the XDF file (I can't see TunerPro from here but I think it is the second menu item along from the left), then open the binary file (first menu item - in the dialogue box to open the file, make sure you select the .), BUEYDOL 403-20-08.xpr. Then, you will see all the tables and constants int he windows on the left... Let us know when you get that far...

Author:	Philgood [ 27 May 2010 18:57 ]
Post subject:	Re: ECM Tuning..
pash wrote: Cool, so that means you have a BUEYD firmware. For that firmware, go here - http://www.ecmspy.com/cgi-bin/ecm.cgi?ecm=89 - and export the TunerPro V4 Bin-Definition to you machine. Then, start TunerPro up, open the XDF file (I can't see TunerPro from here but I think it is the second menu item along from the left), then open the binary file (first menu item - in the dialogue box to open the file, make sure you select the .), BUEYDOL 403-20-08.xpr. Then, you will see all the tables and constants int he windows on the left... Let us know when you get that far... Ok I loaded the xdf files from Ecmspy into tuner-pro for my version of firmware.. then clicked on file/open bin then found the xpr files I downloaded from my eprom..these files are [I hope!] now showing in the left hand column of the Tuner-pro application..

Author:	pash [ 27 May 2010 19:04 ]
Post subject:	Re: ECM Tuning..
So you wanted to: Philgood wrote: Cancel the exhaust valve actuator fault reporting.. Stop my Buell race can popping on over run.. And Improve idle and get the engine to run smoothly..like yours maybe! So lets start with the first issue; in the Flags/Switches window, scroll down till you find Error Mask Byte 4: AMCxxx Double click all the AMC related ones and untick the tick box... Then Save Bin As.... under a different name... MAKE SURE YOU HAVE YOUR ORIGINAL EEPROM CONTENT SAVED SOMEWHERE SAFE Since we are doing one thing at a time, use ECMRead to burn the EEPROM content back to your ECM...

Author:	Philgood [ 27 May 2010 22:47 ]
Post subject:	Re: ECM Tuning..
Slight delay with progress..borrowed her laptop as mine is a mac..blue screen has appeared and all is looking grim!! Normal service will be resumed asap...

Page 2 of 7	All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/

Author:	Philgood [ 28 May 2010 20:14 ]
Post subject:	Re: ECM Tuning..
pash wrote: So you wanted to: Philgood wrote: Cancel the exhaust valve actuator fault reporting.. Stop my Buell race can popping on over run.. And Improve idle and get the engine to run smoothly..like yours maybe! So lets start with the first issue; in the Flags/Switches window, scroll down till you find Error Mask Byte 4: AMCxxx Double click all the AMC related ones and untick the tick box... Then Save Bin As.... under a different name... MAKE SURE YOU HAVE YOUR ORIGINAL EEPROM CONTENT SAVED SOMEWHERE SAFE Since we are doing one thing at a time, use ECMRead to burn the EEPROM content back to your ECM... All done!..unticked 4 AMC boxes and sent new files to ecm..yellow warning light goes out very soon after ignition on now..