UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Fuel Cap Rubber Seal for M2
https://ukbeg.com/forum/viewtopic.php?f=7&t=10401		 Page 1 of 1
Author:  patrick19 [ 25 Mar 2011 11:39 ]
Post subject:  Fuel Cap Rubber Seal for M2
Anyone know a good place to get the replacement seal for this, mine is very close to being fooked.

Thanks for your help.
Author:  mich [ 25 Mar 2011 11:44 ]
Post subject:  Re: Fuel Cap Rubber Seal for M2
HD original or from a hydraulics place? Mine's about to go as well and have never sealed properly... so I'm tempted to go for a slightly chunkier one to make sure it seals properly. If you get one make sure it is petrol/oil resistant. I.e. Viton type.

*EDIT* Found a supplier here: http://www.polymax.co.uk/acatalog/Viton ... BS932.html
Author:  patrick19 [ 25 Mar 2011 14:18 ]
Post subject:  Re: Fuel Cap Rubber Seal for M2
Cheers Mich :D

mich wrote:
HD original or from a hydraulics place? Mine's about to go as well and have never sealed properly... so I'm tempted to go for a slightly chunkier one to make sure it seals properly. If you get one make sure it is petrol/oil resistant. I.e. Viton type.

*EDIT* Found a supplier here: http://www.polymax.co.uk/acatalog/Viton ... BS932.html
Author:  Nutah [ 25 Mar 2011 20:29 ]
Post subject:  Re: Fuel Cap Rubber Seal for M2
Patrick , i have some in my shed
free to a HDRCGB member :mrgreen:
Author:  patrick19 [ 25 Mar 2011 23:23 ]
Post subject:  Re: Fuel Cap Rubber Seal for M2
Cheers Don - much appreciated matey , mines runnin on borrowed time , thanks you are the man.


Nutah wrote:
Patrick , i have some in my shed
free to a HDRCGB member :mrgreen:
Author:  mich [ 29 Mar 2011 10:34 ]
Post subject:  Re: Fuel Cap Rubber Seal for M2
Nutah wrote:
Patrick , i have some in my shed
free to a HDRCGB member :mrgreen:

Have you got another spare? ;) ;)
Author:  Nutah [ 29 Mar 2011 23:58 ]
Post subject:  Re: Fuel Cap Rubber Seal for M2
yes i have :dance:
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/