| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| 1125 Vibes https://ukbeg.com/forum/viewtopic.php?f=7&t=12017 |
Page 1 of 1 |
| Author: | mcrbuelligan [ 18 Aug 2011 13:51 ] |
| Post subject: | 1125 Vibes |
I have alot of vibes from my mirrors - I read that applying silicone to the outer edge where the mirror meets the black plastic helps , has anyone done this ? and would you think leaving a gap for water and water to pass through is recomended. |
|
| Author: | Wesley_Cakes [ 18 Aug 2011 14:56 ] |
| Post subject: | Re: 1125 Vibes |
Try tightening the faring down well and making sure the mirror bolts to the faring are tight.... If that don't work try removing the rubber sleeve and replacing the stock screw things with a good old nuts and bolts Donno if silicone will work, it could make it worse |
|
| Author: | Avalaugh [ 23 Aug 2011 17:10 ] |
| Post subject: | Re: 1125 Vibes |
I've siliconed mine, easy job, made a bit of difference, still vibrates a bit though. I masked up the glass, then just whacked a load in the gap and smoothed off with my finger, its not noticable at all, no one has noticed it since i done it 6 months ago. My bike doesnt get left out so i didnt leave a rain hole ! |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|