UK Buell Enthusiasts Group
https://ukbeg.com/forum/

where do I get.........
https://ukbeg.com/forum/viewtopic.php?f=7&t=12424
Page 1 of 1

Author:  jonnyboyrebel [ 29 Sep 2011 09:19 ]
Post subject:  where do I get.........

......a female connector for the trickle charge connector on my 1125CR? Or would it be easier/cheaper to replace both?

Author:  pash [ 29 Sep 2011 09:30 ]
Post subject:  Re: where do I get.........

Radio controlled car shop it it is the standard Tamiya type, or EBay of course.

Author:  jonnyboyrebel [ 29 Sep 2011 09:41 ]
Post subject:  Re: where do I get.........

we are talking about the same thing here aren't we? the black connector with a dust/water cover that hangs out the left hand side of the bike just below the seat release lock? :?:

Author:  pash [ 29 Sep 2011 10:16 ]
Post subject:  Re: where do I get.........

Yeah, eBay item 250884921478?

Author:  sportster_mann [ 29 Sep 2011 10:18 ]
Post subject:  Re: where do I get.........

If it's an optimate type connector (as fitted to most bikes by the dealer) then you can get the connector from Maplins, depending on if you want male of female -

http://www.maplin.co.uk/kyosho-race-pac ... ctor-11474

http://www.maplin.co.uk/tamiya-race-pac ... ctor-11455

If you want one already made up then try your local dealers, Halfords superstore or Ebay -

http://www.ebay.co.uk/sch/i.html?_from= ... Categories

Should it be the connector as fitted in the wiring loom on 2010 models it is a different connector and is one of these -

http://www.ebay.co.uk/itm/Battery-Tende ... 20b5c5cc73

Author:  deepsix [ 29 Sep 2011 10:33 ]
Post subject:  Re: where do I get.........

Yes I think it would be cheaper to replace the CR

The bike comes with one of those Harley type connectors, Shaws also fit the Optimate type to all new bikes when sold which is nice :yup:
http://www.ebay.co.uk/itm/bike-waterpro ... _500wt_971

Author:  jonnyboyrebel [ 30 Sep 2011 21:09 ]
Post subject:  Re: where do I get.........

All sorted now gents, amazing what you can do with a bit of kitchen foil and some chewing gum!

Author:  mojomick [ 30 Sep 2011 21:20 ]
Post subject:  Re: where do I get.........

My (15 year old) Optimate had a shagged connector, so I just cut it off and crimped on a male and female shielded spade connector. Did the same on the bike lead. Job's a good 'un.

Author:  jonnyboyrebel [ 30 Sep 2011 22:28 ]
Post subject:  Re: where do I get.........

I've bypassed the optimate thing too and just plugged it straight into the mains.

Author:  Mitch [ 01 Oct 2011 00:12 ]
Post subject:  Re: where do I get.........

this it it. Gates connector

http://www.accumate.co.uk/tm77.htm

Image

Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/