| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| 1125 https://ukbeg.com/forum/viewtopic.php?f=7&t=12751 |
Page 1 of 10 |
| Author: | WILLYBUELL [ 01 Nov 2011 21:41 ] | |||
| Post subject: | 1125 | |||
picked these bits up tonight i purchased from the states ,this project WILL take a bit off time mee thinks ,thankfully the VOICES will guide MEEEEEEEEEEEEEEEE 
|
||||
| Author: | The Banana Man [ 01 Nov 2011 21:58 ] |
| Post subject: | Re: 1125 |
what you thinking of doing dude?? |
|
| Author: | WILLYBUELL [ 01 Nov 2011 22:13 ] |
| Post subject: | Re: 1125 |
The Banana Man wrote: what you thinking of doing dude?? a sprung ideler wheel dude |
|
| Author: | Maz [ 01 Nov 2011 22:52 ] |
| Post subject: | Re: 1125 |
The bits you have there are only the start of the problem.......go study them fitted to a bike and look at the relationship to everything else around them  ........I'll give you a starter for 10.......eccentric pivot for the pulley bearing with operating lever sprung to the redundant threaded boss under the footpeg mount.......this will require a new pulley to accomodate bigger ID bearings......you'll also have to move the pulley forward, machine the existing brackets to give more side clearance (or make new items L+R) and when you've done all this, you'll need to move/machine the sidestand etc. etc. etc...........good luck. |
|
| Author: | WILLYBUELL [ 02 Nov 2011 00:00 ] |
| Post subject: | Re: 1125 |
Maz wrote: The bits you have there are only the start of the problem.......go study them fitted to a bike and look at the relationship to everything else around them ........I'll give you a starter for 10.......eccentric pivot for the pulley bearing with operating lever sprung to the redundant threaded boss under the footpeg mount.......this will require a new pulley to accomodate bigger ID bearings......you'll also have to move the pulley forward, machine the existing brackets to give more side clearance (or make new items L+R) and when you've done all this, you'll need to move/machine the sidestand etc. etc. etc...........good luck. DUDE im SHOCKED yove seen fit to give me sum pointers  ,1, these parts are not the start off my problem ,( there are no problems only solutions ) 2, simple is always best ,3,sumtimes you have to think out the box to suckseed ,4 ,not haveing a bike in me shed is bloody RUDE ,but hey ho ,5 ,luck has nothing to do with this project,its about finding a working solution in the constriats of the space allowed to give a constant and forgiveing belt tension , got a couple or three ideas ,im in no hurry ,i thank you kindly for your imput ,look forward to the day we swop spit ,infact ill have a sleepless night now DREAMING of when that day will come  
|
|
| Author: | Maz [ 02 Nov 2011 00:36 ] |
| Post subject: | Re: 1125 |
Crack on chap, cant wait to see your design......btw, my CR already has a solution fitted......no idea if it works or not as the bike has covered less than 800 miles in the 2 years I've had it 
|
|
| Author: | WILLYBUELL [ 02 Nov 2011 06:59 ] |
| Post subject: | Re: 1125 |
will do my best but it will be a while , lack of bike will slllllllllllllllllllllllllllow me down  and im out of sutable material ,couple o weeks till next autojumble here at newark 
|
|
| Author: | battyone [ 02 Nov 2011 09:03 ] |
| Post subject: | Re: 1125 |
Be interested to see what you come up with. With my very long arm and chainconversion, tension is really hard to get right. I just have to set it with the suspension slammed to the floor, so it doesn't pull me output shaft out the box when the bike squats on launch. Very slack at rest, even with rubber guides it sounds awful riding back to the pits. Had thought about remaking the idler wheel with a ptfe outer or making a new assembly to mount on the swingarm. |
|
| Author: | WILLYBUELL [ 02 Nov 2011 23:09 ] |
| Post subject: | Re: 1125 |
off to spend sum time with an 1125 at week end YEEEEEEEEE HAAAAAAAAAA |
|
| Author: | pash [ 04 Nov 2011 00:12 ] |
| Post subject: | Re: 1125 |
Never mind the 1125, I want you to tell us about your Firebolt project: 
|
|
| Author: | WILLYBUELL [ 04 Nov 2011 18:03 ] |
| Post subject: | Re: 1125 |
DOC not quite my shade but it ull doooooooooooo, how do i get my bolt to transform like that ,non of the key positions do it BUGGER 
|
|
| Author: | WILLYBUELL [ 05 Nov 2011 23:13 ] |
| Post subject: | Re: 1125 |
will have a working mock by end of week |
|
| Author: | ursus americanus [ 05 Nov 2011 23:21 ] |
| Post subject: | Re: 1125 |
pash wrote: I like that 
|
|
| Author: | WILLYBUELL [ 05 Nov 2011 23:23 ] | ||
| Post subject: | Re: 1125 | ||
|
|||
| Author: | WILLYBUELL [ 05 Nov 2011 23:30 ] | ||
| Post subject: | Re: 1125 | ||
here is TEASER were i MIGHT be going ,thought this was going to tough PISS EASY ,GUTTED remember only aaaaaaaaaaaaaa teaser ,could be ready for sproutfest HA HA HA HA HA HA
|
|||
| Page 1 of 10 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|