point taken,will use proper res,cheers
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| front brake resevour https://ukbeg.com/forum/viewtopic.php?f=7&t=1284 |
Page 1 of 1 |
| Author: | retromlc [ 26 Jun 2009 18:38 ] |
| Post subject: | front brake resevour |
almost finished with the project bike but can anyone help with this,i have seen plasic tube with a one way stipper in it that you fill with brake fluid as a replacement for the normal remote res you get on the front brake.i'm using a gsx750 front brake m/cyl/ lever set up,i've looked at the demon tweeks site ,motrex stands in the local stealers,,no luck My bikes coming on nicly now ,got all bodywork and the wire wheels fitted,just waiting to get bike to the seat upholester. |
|
| Author: | pash [ 26 Jun 2009 18:41 ] |
| Post subject: | Re: front brake resevour |
What about a picture so far? |
|
| Author: | Maz [ 26 Jun 2009 20:31 ] |
| Post subject: | Re: front brake resevour |
You really dont want to do that with the front brake, get a proper remote resevoir. I regularly substitute the rear res. with a clear plastic tube but would never consider it for the front......fluid expansion when hot and faster pad wear at the front needs a resevoir with belows that will allow for fluid movement whilst isolating it from moisture in the atmosphere. |
|
| Author: | retromlc [ 26 Jun 2009 22:00 ] |
| Post subject: | Re: front brake resevour |
point taken,will use proper res,cheers
|
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|