Hi,
I foolishly put a dust cover over my bike BEFORE it had cooled!
I now have baked on cloth material on the down pipes...any ideas on how to remove it without scratching them?
Cheers,
Wildhenry.

Run the bike to hot again then wipe it clean when it's hot.

Obviously not with your bare hands or any other such product that will just replace one melted material with another

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.

with wire wool.

_________________
2006 XB12Ss..... 1998 S1W..... 1996 S2T
We do not need the help of our friends so much as confidence that they will help us when we need it. –Epicurus

Get the pipes warm and try giving them a rub with a bit if softwood.
A piece of slat from a pallet is just the job.

Works well with the aftermath of a cuban heel/forward control combo on Harleys.

_________________
http://www.youtube.com/watch?v=Pbi5Ggmk ... re=related

_________________
Feros Ferio

Thanks guys....I'll give it a try.

Cheers,
Wildhenry.

Retard your ignition and go for a spin - it'll burn off

_________________
If your dreams don't scare you, they are not big enough.

Thanks .... I got the pipes hot and wiped with an old cotton T-shirt...came off a treat!

Wildhenry.

_________________
Feros Ferio

_________________
Valencia Orange XB12Scg - serviced by Maz 2018
Black P3 Blast - serviced by Maz and fixed by Maz in 2019