UK Buell Enthusiasts Group
https://ukbeg.com/forum/

1125 TPS %
https://ukbeg.com/forum/viewtopic.php?f=7&t=13846		 Page 1 of 3
Author:  jonnyboyrebel [ 11 Mar 2012 21:24 ]
Post subject:  1125 TPS %
Hi all, what should the % reading be when I turn the ignition on in Diag mode? Mine is currently showing 2% ? :?
Author:  sportster_mann [ 12 Mar 2012 11:25 ]
Post subject:  Re: 1125 TPS %
If somebody could remind me how to get into diagnostic mode then I will go and check mine ... :oooops:
Author:  pash [ 12 Mar 2012 11:32 ]
Post subject:  Re: 1125 TPS %
Have you done a TPS reset?
Author:  jonnyboyrebel [ 12 Mar 2012 13:54 ]
Post subject:  Re: 1125 TPS %
is that done like this? twist the throttle 3 times - keep the throttle fully open for one second and fully closed for one second

I'll give it a go and see what happens!
Author:  jonnyboyrebel [ 12 Mar 2012 13:55 ]
Post subject:  Re: 1125 TPS %
sportster_mann wrote:
If somebody could remind me how to get into diagnostic mode then I will go and check mine ... :oooops:


hold both buttons on the cluster down and turn ignition on! :yup:
Author:  Tyrefryer [ 12 Mar 2012 16:25 ]
Post subject:  Re: 1125 TPS %
OK I have to ask, what is TPS? :oooops:
Author:  Nutah [ 12 Mar 2012 17:42 ]
Post subject:  Re: 1125 TPS %
Throttle Position Sensor
Author:  Ash [ 12 Mar 2012 17:50 ]
Post subject:  Re: 1125 TPS %
My wrist has one of those, it shuts off the fuel after about 10mm of twist :D :oooops:
Author:  WILLYBUELL [ 12 Mar 2012 22:10 ]
Post subject:  Re: 1125 TPS %
Ash wrote:
My wrist has one of those, it shuts off the fuel after about 10mm of twist :D :oooops:

southern jessie :ner: :rotfl: :D :D
Author:  jonnyboyrebel [ 13 Mar 2012 13:30 ]
Post subject:  Re: 1125 TPS %
ok, so I took the bike in to be scanned as I couldn't get the TPS to read zero. they did a TPS reset but as soon as I got home and checked it I got a reading of 2% again?! I have also noticed that I've lost the engine braking as it's fueling with the throttle closed? anyone got any ideas?
Author:  pash [ 13 Mar 2012 13:33 ]
Post subject:  Re: 1125 TPS %
Did they update the firmware too?
Author:  sportster_mann [ 13 Mar 2012 13:51 ]
Post subject:  Re: 1125 TPS %
Just got round to checking my CR - it's 2.0% as well
Author:  sportster_mann [ 13 Mar 2012 13:53 ]
Post subject:  Re: 1125 TPS %
Is it 2.0% or 2 volts ?

I need to dig out the manuals ....
Author:  jonnyboyrebel [ 13 Mar 2012 13:56 ]
Post subject:  Re: 1125 TPS %
pash wrote:
Did they update the firmware too?


Don't think so Pash.

2% Gordon.

Any ideas on why it's lost the engine braking it used to have?
Author:  gunter [ 13 Mar 2012 14:31 ]
Post subject:  Re: 1125 TPS %
Quote:
so I took the bike in to be scanned as I couldn't get the TPS to read zero


AFAIK IAC position is mirrored in TP (for fuel metering), so it will never be zero.
As I understand it. I don't have such newfangled kinckknack, so I might be wrong.
Page 1 of 3 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/