| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| New Exhaust fabricated by Albert666 https://ukbeg.com/forum/viewtopic.php?f=7&t=14769 |
Page 1 of 2 |
| Author: | tazzman916 [ 20 Jun 2012 09:51 ] | |||||
| Post subject: | New Exhaust fabricated by Albert666 | |||||
Attached are pics of my new exhaust fabricated by albert666
|
||||||
| Author: | ant69 [ 20 Jun 2012 10:27 ] |
| Post subject: | Re: New Exhaust fabricated by Albert666 |
thats pretty: looks more balanced with the twin outlets. |
|
| Author: | edd [ 20 Jun 2012 13:15 ] |
| Post subject: | Re: New Exhaust fabricated by Albert666 |
Twice as nice sound! 
|
|
| Author: | pash [ 20 Jun 2012 13:36 ] |
| Post subject: | Re: New Exhaust fabricated by Albert666 |
Nice I am in the queue for one for my S1... |
|
| Author: | tazzman916 [ 20 Jun 2012 21:27 ] |
| Post subject: | Re: New Exhaust fabricated by Albert666 |
Just been out to local bike meet, bike runs smoother at low rev's |
|
| Author: | DrBuella [ 20 Jun 2012 21:38 ] |
| Post subject: | Re: New Exhaust fabricated by Albert666 |
Nice bike, hope the forks aren't corroding behind those reflectors 
|
|
| Author: | tazzman916 [ 20 Jun 2012 21:48 ] |
| Post subject: | Re: New Exhaust fabricated by Albert666 |
DrBuella wrote: Nice bike, hope the forks aren't corroding behind those reflectors Don't think so, but over parts are as I use the bike all year round in all weather's to get to work in London |
|
| Author: | DrBuella [ 20 Jun 2012 22:07 ] |
| Post subject: | Re: New Exhaust fabricated by Albert666 |
No, seriously, it's a known problem. 
|
|
| Author: | tazzman916 [ 21 Jun 2012 12:48 ] |
| Post subject: | Re: New Exhaust fabricated by Albert666 |
DrBuella wrote: No, seriously, it's a known problem. Yes I know, so best to leave them on now. |
|
| Author: | Digger [ 21 Jun 2012 13:56 ] |
| Post subject: | Re: New Exhaust fabricated by Albert666 |
No it isn't! Twist 'em off now, before your fork legs rot away..... seriously! 
|
|
| Author: | birdy [ 21 Jun 2012 14:59 ] |
| Post subject: | Re: New Exhaust fabricated by Albert666 |
Any idea what the db level reading is for the pipe? I ask as my xb12 failed to meet the 102 db level at Brands on a modified standard pipe.... |
|
| Author: | tazzman916 [ 21 Jun 2012 15:57 ] |
| Post subject: | Re: New Exhaust fabricated by Albert666 |
birdy wrote: Any idea what the db level reading is for the pipe? I ask as my xb12 failed to meet the 102 db level at Brands on a modified standard pipe.... No idea. I will check out what what db readings I get, from the meter at work on Sat |
|
| Author: | bikerdude666 [ 21 Jun 2012 16:43 ] |
| Post subject: | Re: New Exhaust fabricated by Albert666 |
birdy wrote: Any idea what the db level reading is for the pipe? I ask as my xb12 failed to meet the 102 db level at Brands on a modified standard pipe.... I had 1 the same as this, last year, and I'd say now it's probably louder than 102db, its not far off the noise of my old micron system... |
|
| Author: | albert666 [ 21 Jun 2012 20:41 ] |
| Post subject: | Re: New Exhaust fabricated by Albert666 |
around 105db ish the single exit version has a removable baffle |
|
| Author: | birdy [ 22 Jun 2012 09:10 ] |
| Post subject: | Re: New Exhaust fabricated by Albert666 |
Does the removable baffle bring it down much? Any idea what db it is? |
|
| Page 1 of 2 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|