That will be me then, Birdy. Not responsible for your omission but definitely responsible for Dunk's
Steve
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Rh scoop bolts https://ukbeg.com/forum/viewtopic.php?f=7&t=15304 |
Page 1 of 3 |
| Author: | Dunk1976 [ 19 Aug 2012 17:30 ] |
| Post subject: | Rh scoop bolts |
Does anyone know what size of bolt /screw you need to connect the two parts of the scoop together |
|
| Author: | ursus americanus [ 19 Aug 2012 22:47 ] |
| Post subject: | Re: Rh scoop bolts |
I was pretty sure you just reused the three existing screws which held the blanking plate in place. That's certainly what I did when fitting the Roberto RHS scoop. I'll check the parts book on Tuesday. Steve |
|
| Author: | birdy [ 19 Aug 2012 23:14 ] |
| Post subject: | Re: Rh scoop bolts |
I thought when I fitted mine I had to get some different bolts, not mentioned when I ordered the right scoop at the time from HD. |
|
| Author: | ursus americanus [ 19 Aug 2012 23:27 ] |
| Post subject: | Re: Rh scoop bolts |
That will be me then, Birdy. Not responsible for your omission but definitely responsible for Dunk's Steve |
|
| Author: | Dunk1976 [ 20 Aug 2012 10:20 ] |
| Post subject: | Re: Rh scoop bolts |
You use the three screws on the bike to fit the inner part of the scoop but the outer requires three smaller to attach it to the inner |
|
| Author: | Dunk1976 [ 20 Aug 2012 19:51 ] |
| Post subject: | Re: Rh scoop bolts |
Attachment: uploadfromtaptalk1345488535770.jpg [ 112.3 KiB | Viewed 723 times ] Those are the three mentioned earlier m4 too small m5 to big just I don't know if they are imperial size |
|
| Author: | pash [ 20 Aug 2012 20:27 ] |
| Post subject: | Re: Rh scoop bolts |
You need 3 x AN1005.3FSS - Button head screw 10-32 X 5/8 long in stainless £2 each from Black Bear (bet Steve would just throw some in the post for you as an early birthday present). Or buy 10-32 (3/16 UNF) button headed stainless allen screws: http://www.westfieldfasteners.co.uk/A2_ ... .1900.html Look for 'A2 Stainless 10-32 UNF 5/8 inch Socket Head Button Screw' |
|
| Author: | Dunk1976 [ 20 Aug 2012 20:31 ] |
| Post subject: | Re: Rh scoop bolts |
A wee bit peeved they weren't included but more peeved I couldn't find out the size so thanks nick Point to self must try harder :lol: |
|
| Author: | pash [ 20 Aug 2012 20:34 ] |
| Post subject: | Re: Rh scoop bolts |
99% of the fasteners on your bike are UNF/UNC ('imperial') |
|
| Author: | stinkerbill [ 21 Aug 2012 13:03 ] |
| Post subject: | Re: Rh scoop bolts |
Dunk, I ordered a bag of them when I fitted my scoop, so I probably have enough spare that you can have for nada. Let me check tonight. Save you a few squids. 
|
|
| Author: | Dunk1976 [ 21 Aug 2012 13:27 ] |
| Post subject: | Re: Rh scoop bolts |
Cheers that would be very nice thank you |
|
| Author: | Dunk1976 [ 23 Aug 2012 19:08 ] |
| Post subject: | Re: Rh scoop bolts |
Hey bill did you find the screws bb sent the wrong ones |
|
| Author: | stinkerbill [ 23 Aug 2012 21:20 ] |
| Post subject: | Re: Rh scoop bolts |
Sorry, totally forgot about this! Yes mate I have 3 left! I'll pop them in the post tomorrow for you |
|
| Author: | Dunk1976 [ 23 Aug 2012 21:29 ] |
| Post subject: | Re: Rh scoop bolts |
I've sent you a pm hope you get it tapatalk can be a bit funny sometimes |
|
| Author: | pash [ 23 Aug 2012 22:19 ] |
| Post subject: | Re: Rh scoop bolts |
Dunk1976 wrote: I've sent you a pm hope you get it tapatalk can be a bit funny sometimes 
|
|
| Page 1 of 3 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|