UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
m2 rear shock https://ukbeg.com/forum/viewtopic.php?f=7&t=15628 |
Page 1 of 1 |
Author: | peewee [ 06 Oct 2012 05:39 ] |
Post subject: | m2 rear shock |
my m2 has the longer showa rear shock with the srp kit on it. is it worth tracking down a 14 inch shock upgrade kit ? is there a noticeable handling improvement with the newer shock or should i just save up and go aftermarket ? what is the best after market shock in peoples experience? i`m full of questions today |
Author: | jiltedjohn [ 06 Oct 2012 09:45 ] |
Post subject: | Re: m2 rear shock |
Can only be an AST available from a member, Ronnie in Holland |
Author: | peewee [ 07 Oct 2012 02:50 ] |
Post subject: | Re: m2 rear shock |
i was thinking that was the way to go. have you tried one? |
Author: | richie [ 07 Oct 2012 13:42 ] |
Post subject: | Re: m2 rear shock |
I have and others will tell you the same thing, it's the best thing you can bolt to your bike...in short a revelation |
Author: | jiltedjohn [ 07 Oct 2012 13:49 ] |
Post subject: | Re: m2 rear shock |
had one for the last three years on my X1. Good performance over every road surface , and i'm not the lightest at 17 stone. |
Author: | peewee [ 08 Oct 2012 10:06 ] |
Post subject: | Re: m2 rear shock |
all good, thanks for that |
Author: | peewee [ 08 Oct 2012 12:10 ] |
Post subject: | Re: m2 rear shock |
just a thought, will i still need the 14 inch shock front mount |
Author: | Adam [ 08 Oct 2012 17:24 ] |
Post subject: | Re: m2 rear shock |
peewee wrote: just a thought, will i still need the 14 inch shock front mount Ronnie will tell you what you need Buells handle well despite the dreadful rear shocks they have fitted, the AST will transform your bike I've been playing with some pretty high end Ohlins + Ktec stuff recently, you have to wind the adjusters a fair way before you can tell a difference; and they needed a lot of time and effort to rid them of a lot of stiction (and they're still not right ). The AST is superior in all respects |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |