| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Carbon undertray https://ukbeg.com/forum/viewtopic.php?f=7&t=16101 |
Page 1 of 1 |
| Author: | IBIS [ 27 Dec 2012 20:45 ] |
| Post subject: | Carbon undertray |
Hi eveyone, iv just received a carbon undertray for an X1 I havent had a good look, but it seems that the seat lock has to be repositioned. Has any one fitted one. how much trouble was it and was the effect worth it? |
|
| Author: | kevmean [ 27 Dec 2012 22:01 ] |
| Post subject: | Re: Carbon undertray |
I made an aluminium undertray for muffin so had to relocate the seat lock which was very simple and has been no problem since. All the aftermarket undertrays i've seen require this to be done . |
|
| Author: | Adam [ 27 Dec 2012 22:44 ] |
| Post subject: | Re: Carbon undertray |
kevmean wrote: I made an aluminium undertray for muffin so had to relocate the seat lock which was very simple and has been no problem since. All the aftermarket undertrays i've seen require this to be done .  Repositioning the lock is dead easy. Drill a hole and stick it out of the way 
|
|
| Author: | XB4RT [ 28 Dec 2012 16:33 ] | ||
| Post subject: | Re: Carbon undertray | ||
If its the cheap Chinese one you will have a nightmare with it, I got one and it wasn't shaped around the section at the back of the seat loop so it had to be cut out to take stock indicators & it didn't have any brackets to fix if in position under the seat. It took Maz and me a couple of hours and some jiggery pokery but it looked OK in the end.
|
|||
| Author: | jiltedjohn [ 28 Dec 2012 18:54 ] |
| Post subject: | Re: Carbon undertray |
Australian version? |
|
| Author: | Mickrick [ 30 Dec 2012 08:31 ] |
| Post subject: | Re: Carbon undertray |
Bugger! Just cricked my neck. 
|
|
| Author: | IBIS [ 01 Jan 2013 18:01 ] |
| Post subject: | Re: Carbon undertray |
Mickrick wrote: Bugger! Just cricked my neck. Thanks guys mine looks the same but I thought I should remove the plywood I think Il keep it now looks good with my walking stick! 
|
|
| Author: | Jim [ 11 Jan 2013 20:33 ] |
| Post subject: | Re: Carbon undertray |
Seen one with an R1 tray. Looked ok to be fair. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|