I'm searching the part number for the new style connector 77 (FSM says "2-place Packard") from VR to vehicle main harness. I seem to remember, there was a repair/upgrade kit available when then later VR became available. to replace the old style AMP connectors.

Thanks!

_________________
"It is often said that before you die your life passes before your eyes. It is in fact true. It's called living."
Terry Pratchett

I think you want Y0126.02A8 but don't hold me to it...

Nothing in the 2008/2009/2010 parts books for the connector apart from a reference to TERMINAL & SEAL SET VOLTAGE REGULATOR with the part number above.

The Electrical Diagnostics Manual references a '2-place Dekko'

If you buy a new regulator, it does come with a new connector to replace the old 77 on the harness.

Post a piccy and see if we can match it up.

_________________
08 Specialized Langster

Thanks.

According to http://parts.drivebike.ru/fiche/browse/ ... ram=298266, Y0126.02A8 seems to match, although it's not quite clear if it's the AC or DC side plug of the VR. I will add picts from the main harness connector as soon as I took some.

It's definitely not what is sold as the 2003-2007 connector 77 repair kit (Y1312.02A8). That contains a Deutsch plug, although a bit different than those commonly used.

_________________
"It is often said that before you die your life passes before your eyes. It is in fact true. It's called living."
Terry Pratchett

Well, here you go ... what I need is the male part, which is fitted to the VR.

_________________
"It is often said that before you die your life passes before your eyes. It is in fact true. It's called living."
Terry Pratchett