| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| part no. for connector 77 / 2008+ models https://ukbeg.com/forum/viewtopic.php?f=7&t=16443 |
Page 1 of 1 |
| Author: | gunter [ 25 Feb 2013 19:27 ] |
| Post subject: | part no. for connector 77 / 2008+ models |
I'm searching the part number for the new style connector 77 (FSM says "2-place Packard") from VR to vehicle main harness. I seem to remember, there was a repair/upgrade kit available when then later VR became available. to replace the old style AMP connectors. Thanks! |
|
| Author: | pash [ 25 Feb 2013 20:30 ] |
| Post subject: | Re: part no. for connector 77 / 2008+ models |
I think you want Y0126.02A8 but don't hold me to it... Nothing in the 2008/2009/2010 parts books for the connector apart from a reference to TERMINAL & SEAL SET VOLTAGE REGULATOR with the part number above. The Electrical Diagnostics Manual references a '2-place Dekko' If you buy a new regulator, it does come with a new connector to replace the old 77 on the harness. Post a piccy and see if we can match it up. |
|
| Author: | gunter [ 26 Feb 2013 07:20 ] |
| Post subject: | Re: part no. for connector 77 / 2008+ models |
Thanks. According to http://parts.drivebike.ru/fiche/browse/ ... ram=298266, Y0126.02A8 seems to match, although it's not quite clear if it's the AC or DC side plug of the VR. I will add picts from the main harness connector as soon as I took some. It's definitely not what is sold as the 2003-2007 connector 77 repair kit (Y1312.02A8). That contains a Deutsch plug, although a bit different than those commonly used. |
|
| Author: | gunter [ 26 Feb 2013 17:35 ] |
| Post subject: | Re: part no. for connector 77 / 2008+ models |
Well, here you go ... what I need is the male part, which is fitted to the VR. Attachment:
File comment: harness side connector to VR
pict2012.jpg [ 21.11 KiB | Viewed 243 times ] |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|