viewtopic.php?f=15&t=1629
Some info in that post
You will need around 2 rolls of at least 25" and get the 2inch wide not the inch as its easier. Soak in it water before application, wear rubber gloves and spray with silicon sealant spray once dry
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| exhaust wrap https://ukbeg.com/forum/viewtopic.php?f=7&t=1726 |
Page 1 of 1 |
| Author: | turbonutter [ 21 Jul 2009 23:37 ] |
| Post subject: | exhaust wrap |
looking at wraping my headers , any1 hear done theres ? how much did u use ? dont wana buy 2 much its expensive ! |
|
| Author: | Ash [ 22 Jul 2009 08:57 ] |
| Post subject: | Re: exhaust wrap |
viewtopic.php?f=15&t=1629 Some info in that post You will need around 2 rolls of at least 25" and get the 2inch wide not the inch as its easier. Soak in it water before application, wear rubber gloves and spray with silicon sealant spray once dry |
|
| Author: | min [ 22 Jul 2009 20:03 ] |
| Post subject: | Re: exhaust wrap |
Hello, just done my exhaust not as difficult as you might think you just need to be patient. I bought one 2" by 7.5 meter length from these chaps http://www.autoinparts.com/Heat_Shield_ ... ap_-_648.9°C_(1200°F)/c868_869_874_876/index.html Very good price, fast delivery and plenty to do the job. Hope this helps and I hope the link works 
|
|
| Author: | Ash [ 22 Jul 2009 20:05 ] |
| Post subject: | Re: exhaust wrap |
Did you get all itchy, the fibres are a bugger to get out of your skin! |
|
| Author: | min [ 22 Jul 2009 20:08 ] |
| Post subject: | Re: exhaust wrap |
Crap  link didn't work but the web site is http://www.autoinparts.com and the wrap is in heat shield products section.Nah didn't get itchy, any excuse to wear rubber gloves 
|
|
| Author: | zoidberg [ 22 Jul 2009 20:56 ] |
| Post subject: | Re: exhaust wrap |
Here is a link for the exahust wrap on that site. |
|
| Author: | woz [ 22 Jul 2009 21:05 ] |
| Post subject: | Re: exhaust wrap |
Exhaust wrap should be soaked in water first, this helps make it more pliable and should stop you feeling itchy 
|
|
| Author: | turbonutter [ 22 Jul 2009 21:40 ] |
| Post subject: | Re: exhaust wrap |
cheers for that min , i shall get on and order sum 
|
|
| Author: | Spook [ 23 Jul 2009 11:10 ] |
| Post subject: | Re: exhaust wrap |
turbonutter wrote: cheers for that min , i shall get on and order sum You could order a Harley while you're at it to go with the exhaust wrap. |
|
| Author: | turbonutter [ 23 Jul 2009 12:21 ] |
| Post subject: | Re: exhaust wrap |
Spook wrote: [quote="turbonutter"peach for that min , i shall get on and order sum You could order a Harley while you're at it to go with the exhaust wrap.[/quote] already got 2 ! 1990 fxrs 1340 , highly modded 2002 883r sporster with 1200 motor |
|
| Author: | muzza [ 23 Jul 2009 22:15 ] |
| Post subject: | Re: exhaust wrap |
i did mine an still undecided weather it looks good or not |
|
| Author: | turbonutter [ 23 Jul 2009 22:56 ] |
| Post subject: | Re: exhaust wrap |
muzza wrote: i did mine an still undecided weather it looks good or not post up some pics
|
|
| Author: | Spook [ 24 Jul 2009 08:39 ] |
| Post subject: | Re: exhaust wrap |
muzza wrote: i did mine an still undecided weather it looks good or not I can answer that for you if you want. |
|
| Author: | Lucky [ 24 Jul 2009 09:00 ] |
| Post subject: | Re: exhaust wrap |
Spook wrote: muzza wrote: i did mine an still undecided weather it looks good or not I can answer that for you if you want. Yes it looks peachy.
|
|
| Author: | muzza [ 24 Jul 2009 10:58 ] |
| Post subject: | Re: exhaust wrap |
Spook wrote: muzza wrote: i did mine an still undecided weather it looks good or not I can answer that for you if you want. declined...... ps im now on a "monster" can for more capacity! 
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|