UK Buell Enthusiasts Group
https://ukbeg.com/forum/

isolator bolts
https://ukbeg.com/forum/viewtopic.php?f=7&t=17562		 Page 1 of 2
Author:  Jim [ 17 Aug 2013 22:10 ]
Post subject:  isolator bolts
Anyone know where I can get any and how much..?

Tried my local harley dealership, they've told me they are only possibly available from the vintage parts section in USA. Haven't been quoted a price yet.

Pash, tried your suggestion, the only bolt they could get is same thread etc but about 25% shorter.

Assistance greatly appreciated as my bike build has hit a pause...

Ta

Jim
Author:  WILLYBUELL [ 18 Aug 2013 11:38 ]
Post subject:  Re: isolator bolts
Jim wrote:
Anyone know where I can get any and how much..?

Tried my local harley dealership, they've told me they are only possibly available from the vintage parts section in USA. Haven't been quoted a price yet.

Pash, tried your suggestion, the only bolt they could get is same thread etc but about 25% shorter.

Assistance greatly appreciated as my bike build has hit a pause...

Ta

Jim

BAPP ,we use the outlet in doncaster , :yup:
Author:  Maz [ 18 Aug 2013 12:26 ]
Post subject:  Re: isolator bolts
Do you mean the front engine mount bolts for a tuber ?......if so, your dealer is talking shite......AA0722.1CBZ are readily available and cost £18.48 incl. vat for the pair.
Author:  Jim [ 18 Aug 2013 17:49 ]
Post subject:  Re: isolator bolts
Cheers Willy. Will look at them. Pash has given me another place too so should sort it.

Maz, no not front bolts, they're the mushroom headed fat one's that go into the isolator thing on each side of the frame where the swingarm goes. I'll take a pic of one next time I'm over my mates house. They're alloy if that assists any
Author:  Maz [ 18 Aug 2013 18:04 ]
Post subject:  Re: isolator bolts
Nope, they're not alloy and the torx screws should be avoided IMO.... the old stylie cap heads are far superior as they dont cut into the rubber and actually provide some support to the isolator NB. do not fit the flat washers :idea:
Author:  Jim [ 18 Aug 2013 18:24 ]
Post subject:  Re: isolator bolts
Do you know of any dealers..?
Author:  brother in buells [ 18 Aug 2013 21:24 ]
Post subject:  Re: isolator bolts
Yep http://www.twinmotorcycles.nl/ :yup:

http://twinmotorcycles.nl/webshop/artik ... 5&s=tuning
Author:  Jim [ 18 Aug 2013 22:44 ]
Post subject:  Re: isolator bolts
Cheers brother :yup:
Author:  Jim [ 21 Aug 2013 16:40 ]
Post subject:  Re: isolator bolts
Bolts have been ordered from twins. Good link brother b, saved me a fair bit of hassle. Let the build re commence. :yup:
Author:  TOPGUMM [ 21 Aug 2013 17:43 ]
Post subject:  Re: isolator bolts
How much was the postage from Twin :?:
Author:  Jim [ 21 Aug 2013 18:29 ]
Post subject:  Re: isolator bolts
VAT was nearly 10€, postage 22€.

Plus the 2 bolts, purchase 55€
Author:  pash [ 21 Aug 2013 18:59 ]
Post subject:  Re: isolator bolts
And I thought these were expensive...

Image

Obviously they need a bit of rework and plating...
Author:  brother in buells [ 21 Aug 2013 20:46 ]
Post subject:  Re: isolator bolts
Pash ,are you getting your own warehouse? ;)
Author:  pash [ 21 Aug 2013 20:51 ]
Post subject:  Re: isolator bolts
Opted for a junkyard instead :run:
Author:  WILLYBUELL [ 21 Aug 2013 21:30 ]
Post subject:  Re: isolator bolts
Jim wrote:
VAT was nearly 10€, postage 22€.

Plus the 2 bolts, purchase 55€

FUCKING JESUS DUDE .bapp do 10.9 grade socket/capheads plated .....DOUBT they would have cost nowt like that FFS n ALL SKT/CAPS are 10/9 unless other wize specified higher :headbang: :headbang:
Page 1 of 2 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/